Beautiful Moments In Balmy Blue

Monday’s Are Hard, Stamping Shouldn’t Be

Card made with Beautiful Moments Stamp Set

Monday’s are hard, but in this card making series, I will show you that stamping shouldn’t be. In fact, it’s quite easy. And with minimal supplies and minimal efforts, you can get fabulous results! To see last Monday’s card, click here.

Beautiful Moments Stamp Set

Today’s Monday Card features the stamp set, Beautiful Moments. This is a fantastic stamp set if you enjoy coloring, with its large open images. If you are not a fan of coloring, I am going to show you a way to make colorful clothing without actually coloring.

Beautiful Moments Stamp Set, item #151677

Our fabulous Monday Card uses minimal supplies: one stamp set, Beautiful Moments, two ink pads, Early Espresso and Balmy Blue, and two colors of cardstock, Balmy Blue and Crumb Cake. Please follow along!

A Monday Card

The Card Recipe

Balmy Blue CS: 5-1/2 x 8-1/2″, score at 4-1/4″ for card base.

Balmy Blue CS: 4 x 5-1/4″, 3-1/4 x 3-1/4″, scrap @ 2-1/2 x 2-1/2″

Crumb Cake CS: 3-1/2 x 3-1/2″, 3 x 3″, 1 x 4″, 3/4 x 2-1/2″

Stamp And Assemble

This Monday’s Are Hard, Stamping Shouldn’t Be Card starts out with the typical “fold in half” and score with your bone folder to get a great crisp card base. Let’s not break tradition.

However, my TIP to you is to score once, invert the fold and score again. Your inner crease is now as crisp as the outer one. This makes for a professional looking card base!

Balmy Blue card base and bone folder

Create Your Own Designer Series Paper

With the minimal supplies used in this card, we are not adding designer series paper to it. We are making our own! I use this great background pattern effect with any stamp sets I own.

I suggest stamping on scrap paper, as this technique has you stamping off the edge of your cardstock. Starting at the bottom, stamp the line stamp from the Beautiful Moments Stamp Set in Balmy Blue Ink on the 4 x 5-1/4″ Balmy Blue CS.

Next, continue to fill in the wavy lines up each side of the paper and along the top. I varied the position of the stamp to get a random pattern. Also, I criss-crossed some of the lines, like choppy waves. I focused on the outer edges, knowing the middle would eventually be covered in layers.

Stamping the line stamp from Beautiful Moments Stamp Set

Simple Stamping

This Easy Monday Card couldn’t get any easier! I used Early Espresso Ink to stamp the grassy plants from the Beautiful Moments Stamp Set onto the 1 x 4″ piece of Crumb Cake CS. I varied the height of each stamping, filling my paper as I went across it.

Moving on to my sentiment, I chose the stamp “collect beautiful moments” from the Beautiful Moments Stamp Set. The remaining sentiments in this set would have worked just as well.

I inked the stamp in Early Espresso and applied it to the 3/4 x 2-1/2″ Crumb Cake CS. Purposefully, I made sure to stamp the sentiment as far left as I could. This enabled me to tear off a small section on the right, leaving a jagged edge.

Stamps from Beautiful Moments Stamo Set and Early Espresso Ink

Beach Combers

The two young ladies with their sand buckets make an adorable pair. I stamped this image from the Beautiful Moments Stamp Set twice in Early Espresso Ink, once on the 3 x 3 Crumb Cake CS, and once on the Balmy Blue scrap.

I kept the image on the Crumb Cake CS closer to the top, to allow room for the sentiment piece. The Balmy Blue scrap has an entirely different purpose.

Girls with buckets stamp from Beautiful Moments Stamp Set

To make colorful dresses for my girls, I brought in my Paper Snips and cutting skills. First, I cut the pair apart, so I could tackle each dress one at a time. Next, I fussy cut each dress, leaving the dark outline visible.

Fussy Cutting stamped dresses

Lastly, I placed the beautiful blue dresses on my beachy friends. This is a great way to add color without coloring. But, you could also add pattern paper here and play paper dolls all day long. Just remember that you need to be able to see the stamped image on the pattern paper to cut it out.

Easy Monday Card Layering

The stamping on the outside of the card is complete. Now it is assembly time. The beach combers have two additional square layers to complete their matting.

Layer 1 of card front

The rest of the card also goes together just as easy. First, I layered the 4 x 5=1/4″ Balmy Blue CS onto the card base. I added my beach combers layer combo toward the top, centered in the middle. I placed the sentiment under the girls feet, toward the left of the square, with the jagged edge flowing to the right. The grassy fronds were placed closer to the bottom of the card.

Finished Layering of the card

The Insider Job

Your card is beautiful on the outside, now lets make it pretty inside too! I like to mimic some of the outer stamping into a corner of the inside card. This way the card has continuity and there is still lots of room to add your own sentiment or written thoughts.

For this card, I stamped the girl on the left into the bottom corner, making sure my stamp flowed well off the paper where needed. I also stamped a grassy frond next to her. This was done using Early Espresso Ink.

To make her fancy, I stamped the dress on a Crumb Cake scrap and fussy cut it. I adhered it with my favorite adhesive, Tombow Liquid Glue. Now, this image is the opposite of what is shown on the front of the card, yet similar in nature.

Inside Stamping using the Beautiful Moments Stamp Set

Change It Up!

This is when I usually show a card made with this same layout that incorporates some ribbon or bling, something to step it up beyond simple. Today, I am sharing a card without additional embellishment, instead changing the colors and content.

It is my hope to inspire you to use the card recipes I include in my Monday Card Series, using whatever colors and stamps you have on hand. My Christmas In July card does just that! It is made with the same recipe as the Beautiful Moments Beach Card.

Christmas In July Card
This card is made using the stamp set Perfectly Plaid, item #149418

This nature lover’s card is not over-the-top red and green and jolly. I kept the tones quite neutral, with Pear Pizzazz and Crumb Cake. I sponged the Crumb CS with like colored ink to deepen the tone. The trees were punched from DSP using the Pine Tree Punch (item #149521), then added to the card front with dimensionals for lift.

Here is the side by side comparison so you can see how alike these two cards really are!

What will you create with this recipe? The possibilities are endless when you are crafty…or have a great recipe to work with!

I hope you enjoyed making this easy card on a hard Monday with me. My video tutorial can be found on my FaceBook page, as well as my YouTube channel. If you need any supplies for this card, please feel free to visit my online store, https://www.juliemakson.stampinup.net, at any time. See you next Monday for another installment of:

Monday’s Are Hard, Stamping Shouldn’t Be!

Basic Pattern Decorative Masks: Victorian

Decorative Masks Part II

Card made with Basic Pattern Decorative Masks, Victorian style

Basic Pattern Decorative Masks (item #150697) come in a set of 4 masks, sized 6 x 6″ each. They are thin and pliable, plastic in nature and easily cleaned. The enclosed insert lists 5 different methods you can use when you create with these decorative masks: spritz, sponge, trace, emboss and texture.

The variety in the Basic Pattern Decorative Masks is wonderful, and this set has something for everyone. Part I in my mini series on Decorative Masks focused on the Dot Mask, and creating a textured background. To see that post, which contains great information and card making tips, click here.

Basic Pattern Decorative Masks

In Part II of my mini series on Decorative Masks, I have focused on the Victorian Mask and the spritzing technique. I find this technique useful with any mask, and can use it in any color as well. Let me show you the fun of spritzing!

Spritzing Technique

Are you looking for big impact in card making on a low budget? I have news for you: spritzing is the way to go! The Stampin’ Spritzers (item #126185) cost $3 for a set of 2. Classic Stampin’ Ink Refill (in the color of your choice) costs $3.75. All you need now is rubbing alcohol or water, and you have the mixin’s for some wow.

Stampin' Spritzer and Classic Stampin' Ink Refill

The magic mix of spritzer lasts a long time, since a little goes a long way. In fact, I still had some left-over from another project, as can be seen in my blog post, here.

Tips For Mixing And Using The Stampin’ Spritzers:

*Stampin’ Spritzers can be used to spray color saturation on your paper.

*Add 6-8 drops of Ink Refill to the opened spritzer (protective cap pops off and spritzing mechanism/tube screws off) and dilute with rubbing alcohol or water. Rubbing alcohol is preferred to water, since the alcohol base dries quicker. Percentage on rubbing alcohol bottle is not crucial.

*The more liquid, the lighter the overall color. Add more ink or more liquid until you are happy with the result. Experiment!

*Shake your spritzer well before each use to avoid settling or separation. Store your filled spritzer upright.

*Spritz with care! You can use an empty card-board box to place your paper in and spritz away if you are concerned with making a mess. I find that having a great clearance around my work surface ensures that nothing gets an accidental coating of color from over-spray.

*Before using it on your project, you may need to flatten your finished color-spritzed paper. Drying time will vary depending on the liquid choice used and humidity levels in your home.

*Watercolor Paper or Shimmery White Cardstock work nicely with these wet procedures. And don’t rule out Glimmer Paper for extra sparkle.

*The spritzer bottle is easy to clean, just wash with soapy water and rinse. Don’t forget to clean the inner tube and spritzer mechanism too.

Set Up For Spritzing Success

Spritzing can be done with or without a mask. Just like in my previous Decorative Mask post using Embossing Paste, I highly recommend securing your paper and mask to avoid shifting mid-work while spritzing.

Decorative Mask and spritzer

I took advantage of a Tombow Removable Adhesive Tape Runner, and secured my cardstock to my graph paper. This kind of tape runner allows temporary holds, and is easily removed without tearing or residue. In fact, when I rub my finger across the removable adhesive, it crumbles away like pencil erasing. Only a very small amount is needed here.

Next, I secured the Basic Pattern Decorative Mask Victorian design in the exact position I wanted it to be. This time I used Painters Tape to hold the mask down. I made sure I did not cover my cardstock with the tape.

Time to spritz! I applied an even coverage over the entire Decorative Mask. The alcohol scent can be strong, and liquid that does not hit the paper will remain on top of the mask. I absorbed the extra fluid by blotting with a paper towel.

Spritzed masked cardstock

By taping down one side of the mask only, I was able to lift the mask once it was dried off, to view my handi-work. I decided to spritz some more in certain areas, and placed the mask back in its original position to do so.

My paper dried quite quickly, and it did not need to be flattened before use.

Just Saying Hello

The light purple of my spritzed masked cardstock needed a strong coordinating hue to back it up, so I chose a Blackberry Bliss card base. To go with the soft pastel-color focal background, I added in Soft Sea Foam green, too.

I trimmed a small piece off of my spritzed paper, and set it aside for another project.

Adjusting the size of the spritzed masked cardstcok

I was looking for a generic, large sentiment for this card, along with a basic die cut. So, I pulled out the stamp set, Tasteful Touches (item #152562) and inked “just saying hello” in Blackberry Bliss.

Tasteful Touches Stamp Set and Blackberry Bliss Ink

Next, I die cut the sentiment using one of my new favorites, the Tasteful Labels Dies (item #152886).

Tasteful Labels Dies
The Tasteful Touches Stamp Set and Tasteful Labels Dies can be purchased as a bundle for an instant 10% savings, using item #154098.

Victorian Flowers

The Many Layered Blossoms Dies (item #153582) provide two large open flower die cuts, which can be used individually or combined. I wanted a lot of my spritzed masked background to show, so I chose the thinner outline of the dies to use.

I die cut the flowers in Purple Posy CS, so they would not compete with my light purple background.

Many Layered Blossoms Dies and Take Your Pick Tool
The Take Your Pick Tool (item #144107) and Take Your Pick Die Brush Tip (item #149655) are great for getting all the fine die cuts removed quickly and easily. Here, I chose to keep some of the cut-aways intact.

I love to add some greenery to my flower cards, but the Many Layered Blossoms Dies do not provide any leaves. Instead, I took small scraps of Soft Sea Foam CS and die cut just the leafy outer areas of the bolder die image.

Stampin’ Up! brought in a new version of Adhesive Sheets (item #152334), and I was so happy to use them on the smaller die cut flowers. This double sided sticky paper works wonders where glue or tape are impossible. Simply remove adhesive on one side, attach to cardstock, die cut, and you have an “instant sticker”.

Small die cuts from Many Layered Blossoms Dies and Adhesive Sheets
I mistakenly thought the small flower dies would combine together to make two-toned flowers. The thinner flower dies are meant to go on the outer flowers of the large flower die.

Award Winning Ribbon

Stampin' Up! Ribbon in wall holder

All this ribbon and not one is in the color I am looking for today. But, I have a super simple solution to make white ribbon the right ribbon!

Did you know that you could color white ribbon with any color of Stampin’ Blends and create the shade you want? My favorite ribbon to do this with is the 1/4″ Crinkled Seam Binding Ribbon (item #151326).

Coloring the Crinkled Seam Binding Ribbon with Stampin' Blends

I chose the light Soft Sea Foam Stampin’ Blend, which was the color of ribbon I was looking for. I placed the ribbon on my Silicone Craft Sheet (item #127853, also great for use with glue and tape) and used the broad tip brush to swipe color along the ribbon. The ribbon soaks up the color and dries quickly.

Layering on the card front
I used Tear & Tape Adhesive (item #138995) to secure my ribbon and the ends of the leaves. My sentiment die cut will cover this area on the finished card.

A Little Hello

Remember that small piece of spritzed masked cardstock I cut away for another project? It was perfect for a mini card.

Mini’s are easy to make: cut a piece of cardstock 3 x 6″ and score at 3″ for a 3 x 3″ card. The mini cards fit the 3 x 3″ Envelopes (item #145829) for big impact.

Mini Card with Itty Bitty Greetings Stamp Set
Itty Bitty Greetings Stamp Set (item #151331) is no longer offered as a wood mount option. Yours will come in cling (red rubber) stamps.

As you can see, spritzing with the Basic Pattern Decorative Masks is easy and versatile, and another great way to incorporate masks into your projects. If you need any of the supplies I used in my cards today, head over to my online store, https://juliemakson.stampinup.net.

Cards made with Basic Pattern Decorative Masks

There are lots of options and uses left to explore with Decorative Masks, and I will continue to cover them in my ongoing mini series. Be sure to check back in, to see what I come up with next!

Basic Pattern Decorative Masks: Dots

Decorative Masks Part I

Card made with Dots Basic Pattern Decorative Mask

Basic Pattern Decorative Masks (item #150697) come in a set of 4 masks, sized 6 x 6″ each. They are thin and pliable, plastic in nature and easily cleaned. The enclosed insert lists 5 different methods you can use when you create with these decorative masks: spritz, sponge, trace, emboss and texture.

Masks are not new to the Stampin’ Up! world. In fact, there have been several different package assortments thru the years, as my drawer is full of them! The variety in the Basic Pattern Decorative Masks is wonderful, and this set has something for everyone.

Basic Pattern Decorative Masks

Part I in my mini series on Decorative Masks is focused on the Dot Mask, and creating a textured background. But really, you could create a textured background with any mask! Let me share some insight on Embossing Paste.

Embossing Paste For Texture

The Stampin’ Up! Embossing Paste currently comes in 2 varieties: Shimmery White (item #145645) and White (item #141979). The paste can be dyed with Classic Stampin’ Ink Refills, and used on cardstock, fabric or other materials.

It was first introduced in 2017, and like all new things, I had to try it out. Important lessons:

*Each time you use it, you will need to stir it up. The Palette Knives (item #142808) are so handy when using the paste, but a popsicle stick or plastic knife would work too. Think of the paste as spackle: apply liberally to fill in the cracks, and then swipe off the excess, putting it back in the jar.

*The paste will dry out very quickly. Keep it covered securely. You may want to add wax paper, saran wrap or aluminum foil over the top of the paste before you screw the lid shut tightly. I did not, and had a jar dry out long before it was even half used up. Adding water to try to re-hydrate did not work.

*The paste needs to be cleaned off your mask immediately after use. You may find that even then, it will leave a white residue film. This after-effect will not harm the mask in any way or cause issues with use. But, your mask will look used. You can use a baby wipe, and follow up with a water rinse and air dry. The mask can also be cleaned with dish soap and water.

Set Up For Texture Success

Using the Embossing Paste with Decorative Masks is really easy. Like anything, practice helps. I recommend securing your paper and mask whenever possible to avoid shifting mid-work.

Setting up for Embossing Paste on Decorative Mask
Keep the foam insert from your jar (seen above in jar lid) as an added barrier against dried out paste.

I took advantage of a Tombow Removable Adhesive Tape Runner, and secured my cardstock to my graph paper. This kind of tape runner allows temporary holds, and is easily removed without tearing or residue. In fact, when I rub my finger across the removable adhesive, it crumbles away like pencil erasing. Only a very small amount is needed here.

Next, I secured the Basic Pattern Decorative Mask Dot design in the exact position I wanted it to be. This time I used Painters Tape to hold the mask down. I made sure I did not cover my cardstock with the tape.

Time to spackle! I used my Pallet Knife to add the Shimmery White Embossing Paste over the Decorative Mask. It plops on and spreads like frosting. Be sure to wipe off the excess after every area you want to cover has enough paste in the stencil holes.

Dot Decorative Mask and Shimmery White Embossing Paste

When I removed the Decorative Mask, this was my result! You can see in my finished piece that more could have been added in certain areas. I did not fully add Embossing Paste to every dot, with the intention of using only part of the created image for my project. This look is also artistic, with its partial effect.

The Embossing Paste dries very quickly on the project, so I did not use any heat (from my Heat Tool, item #129053) also used for heat embossing) to speed it along. It remains quite solid once it is completely dry, and will not fall apart with inquiring fingers. The Shimmer White Embossing Paste looks like glitter paper as the light hits it.

This Calls For Confetti!

The Shimmer Embossing Paste had a greenish tint when wet on the Basic Black CS, so I decided to use Bermuda Bay and Pool Party as the card’s coordinating colors. But don’t worry, when dry it appears glittery white!

First, I die cut a stitched rectangle from a piece of Pool Party CS, to provide a cut-away over my textured embossed piece. Next, I stamped it with the Drybrush Background Stamp (item #152599) and Pool Party Ink.

Drybrush Stamp Set and So Sentimental Stamp Set

I thought the shimmery dots looked like a happy celebration, so I chose the sentiment “this calls for confetti” from the So Sentimental Stamp Set (item #151691). I used the Stitched So Sweetly Dies (item #151690), which can be combined with the stamp set for a bundle and 10% savings (item #153828).

Stitched So Sweetly Dies

When I was working on this card, I tried different combinations of die cuts and colors, as can be seen above (along with the Pool Party cut-away). In the end, I chose a Pool Party oval (and sponged the edges in Pool Party Ink to deepen the color), a Whisper White Stitched Rectangle backer, and heat embossed the sentiment with White Embossing Powder on Basic Black CS.

Glitz It Up!

Sentiment close up

To make this card stand out, I added dimensionals beneath the Pool Party cut-away layer before placing it over the textured embossed cardstock. Next, I die cut the swirly spray in Whisper White, from the Stitched Stars Dies (item #150653), which is perfect for any celebrational card. I taped this to the back of my sentiment piece using regular scotch tape.

Stitched Stars Dies

I really wanted to use both the Glittered Organdy Ribbon (item #147897) and the 3/8″ Sheer Ribbon in Pool Party (item #152462). In the end, only the Black Glittered Ribbon made it onto my card. The Sheer Pool Party Ribbon was so light it just disappeared on the card front.

Glittered Organdy Ribbon and 3/8" Sheer Ribbon in Pool Party

Decorative Mask Delight

Card made with Basic Pattern Decorative Masks and Shimmery Embossing Paste

You can see that making this card with the Basic Pattern Decorative Masks was pretty simple, and stylish fun! Next time you visit my online store, https:juliemakson.stampinup.net, be sure to add the masks and some Embossing Paste to your shopping cart.

Creating raised texture is a great way to use those masks! Come back to see even more fantastic options for the Basic Pattern Decorative Masks over the course of my on-going 4 part mini-series. The possibilities will enthrall you!