Basic Pattern Decorative Masks: Trees -Page The Maine Stamper

Decorative Masks Part IV

Card made with tree decorative pattern mask

Basic Pattern Decorative Masks (item #150697) come in a set of 4 masks, sized 6 x 6″ each. They are thin and pliable, plastic in nature and easily cleaned. The enclosed insert lists 5 different methods you can use when you create with these decorative masks: spritz, sponge, trace, emboss and texture.

In Part I of my series, I covered the Dots Mask and Embossing Paste. For Part II, I moved on to the Victorian Mask and Spritzing. Part III of this series on Decorative Masks covers the Mosaic Mask and Sponging. And in the final post of my series, I am using the Tree Mask and Heat Embossing.

Heat Embossing

Heat embossing requires the use of a Heat Tool (item #129053) and embossing powder. The result of heat embossing is shiny (or glossy) raised images that are lovely both visually and as texture.

When I heat emboss, I prefer to use VersaMark Ink, a clear ink also used to create watermark images. VersaMark Ink holds the embossing powder that needs to be heated to a melting point quite well, but a very wet ink pad in any color will also work.

Heat Tool and Embossing Powders — Stampin’ Up! Embossing Powders come in Gold, Silver, White and Clear. Over the years there have been many color versions, and I have a vast array of them. I keep the commonly used Embossing Powders in plastic containers, along with a plastic spoon for use.

I have the older Stampin’ Up! Heat Tool as well as the current version, and a wooden stand that holds either. My stand makes it hands free easy: I just turn on the heat and hold my paper under it until the powder is completely melted. I recommend using a clothespin or clip on your paper to help extend your hand away from the heat, it can get intense!

Tips For Heat Embossing

*Make sure you use the Embossing Buddy if you have one. This helps keep static off your paper and the Embossing Powder from collecting where you don’t want it. Stampin’ Up! no longer sells them, but you can purchase them elsewhere.

*Keep that VersaMark Inkpad full of ink! If the ink pad is too dry, the powder will not stick to your paper and you will have splotchy embossing. I always recommend you buy a refill when you buy an ink pad.

*If your Embossing Powder becomes damp or collects any moisture, it will not stick and melt properly. You can place a few pieces of dry rice into your container to absorb the unwanted moisture.

*You don’t have to use VersaMark! If your ink pad is really wet, you can use any color of ink with the Clear Embossing Powder and you will get wow results!

*Don’t over-heat your embossed piece. You will be able to see the melting process as the waves of heat hit your image and the powder begins to melt. Move your paper slowly under the heat so your paper doesn’t scorch and you reach all intended areas.

*Carefully inspect your embossed piece to see if you missed any areas before touching it. If you have missed an area that still has dry powder, touching it will remove the powder and leave a smudgy blank spot. Put the paper back under the heat where needed for a brief touch up.

Setting Up For Heat Embossing Success

You can heat emboss with or without a mask. Just like in my previous Decorative Mask posts, I suggest securing your paper and mask to avoid shifting mid-work.

I took advantage of a Tombow Removable Adhesive Tape Runner, and secured my cardstock to my graph paper. This kind of tape runner allows temporary holds, and is easily removed without tearing or residue. In fact, when I rub my finger across the removable adhesive, it crumbles away like pencil erasing. Only a very small amount is needed here.

Next, I secured the Basic Pattern Decorative Tree Mask in the exact position I wanted it to be. This time I used Painters Tape to hold the mask down. I made sure I did not cover my cardstock with the tape.

Preparing the Tree Decorative Mask for heat embossing use

To get a good coating of the VersaMark Ink over my mask, I removed the cover and applied the entire ink pad over the mask surface, in the same manner I would apply ink to a large stamp.

After I applied the VersaMark, I carefully removed the mask and immediately added Gold Embossing Powder to my cardstock. The plastic spoon in my container helps me scoop the dry powder over the paper. I angle the paper over the container so the loose powder goes back in without creating a huge mess.

Next up: heat embossing!

Gold embossed image using tree decorative mask — This was my first attempt at this technique. In hindsight, my VersaMark Ink Pad could have been wetter for a better application resulting in more gold powder to heat. Wherever the light is hitting the paper is where you really see the shine effect.

The VersaMark Ink left my stencil very sticky. When I rinsed it in water to clean the stencil, the residue did not go away. I added some soap and my stencil was in good shape after that!

Oh Christmas Card-inal

The beautiful gold embossing needed a fancy card layout, and the Tree Mask background brought to mind birds. The oversized cardinal stamp from the Toile Christmas Stamp Set (item #150469), and coordinating Christmas Cardinal Dies( item #150640) were the perfect fit for something special!

I began by stamping my cardinal in Memento Black Ink onto Whisper White Cardstock. I used Stampin’ Blends in a variety of colors to create my feathered friend’s look. After I die cut the cardinal out, I fussy cut some of the additional white outline and finished coloring all the edges.

Using Stampin' Blends to color cardinal from Toile Christmas Stamp Set

I stamped the branch with berries from the Toile Christmas Stamp Set in the same manner, except this time I stamped off first for a lighter black outline. Again, the Stampin’ Blends helped me create beautiful rich color in no time.

Branch stamp from Toile Christmas Stamp Set and Stampin' Blends

Merry And Bright

The sentiment I chose from the Toile Christmas Stamp Set has a coordinating die too. Because my card base and layer colors were more nature themed, I wanted my sentiment to blend in as well. I experimented with Crumb Cake and Soft Suede Cardstock using Mossy Meadow Ink.

Sentiment from Toile Christmas Stamp Set and die — The Soft Suede was more gold toned, but too dark, so I chose the lighter Crumb Cake version.

Little Embellishments

I love to add a little flair, or spray of paper fun, around my focal piece. The dies in the Christmas Cardinal Dies make this simple to accomplish. First, I die cut the green leaves using Mossy Meadow Cardstock. Next, I added a little ink by sponging the same color over them to deepen my images.

Die cut leaves from Christmas Cardinal Dies and Mossy Meadow Ink and sponge

What goes with gold? More gold. I used small scraps from my Gold Foil Sheets (item #132622) to die cut the sweetest swirls. I also pulled some Real Red Double Stitched Satin Ribbon (item #151155) for accent.

Swirl dies from Christmas Cardinal Dies and Gold Foil Paper

Flight To Success

Once I had all the elements of my card in order, the assembly process was a breeze. I used a combination of Tombow Liquid Glue, Stampin’ Seal, Tear & Tape, and Stampin’ Dimensionals for adhesive.

Finished card using heat embossing and the tree decorative pattern mask

As you can see, heat embossing with the Basic Pattern Decorative Masks is easy and versatile, and another great way to incorporate masks into your projects. If you missed any of the installments of decorative mask use, be sure to read back thru my posts for additional ideas and information.

Cards made with Basic Pattern Decorative Masks — Four different pattern masks, four different techniques, four different cards!

Looking for any of the supplies I used in my card today? Head over to my online store, https://juliemakson.stampinup.net. You will be sure to find just what you are looking for, and even more!