Hand Made Cards Archives - PageThe Maine Stamper

My Thoughts On The Slimline Card Rage

August 20, 2020

Slimline Cards

Have you seen all of the slimline cards popping up everywhere lately? In fact, I tried the slimline card fad during my last “Monday’s Are Hard, Stamping Shouldn’t Be” Series (which you can see here in case you missed it. P.S., adorable zebra alert!).

And I have to admit, it was kind of cool. Different and unique.

Size Matters

You may be wondering “why the sudden demand for an odd size card?”. Card makers typically cut a full sheet of 8-1/2 x 11″ piece of cardstock in half and make two A2 card bases.

Two A2 card bases from one sheet of 8-1/2 x 11" cardstock. — The A2 card measures 4-1/4 x 5-1/2″ when folded and closed.

Suddenly, we are cutting our cardstock a little differently. Now, instead of cutting it in half, we are chopping off a 4″ piece from the 11″ length and folding the remaining cardstock in half. This gives us a closed slimline card base measuring 3-1/2 x 8-1/2″.

The slimline card base and remaining cardstock from an 8-1/2 x 11" sheet of paper. — The slimline card base, taken from an 8-1/2 x 11″ piece of cardstock will leave a remnant of 4 x 8-1/2″.

Weird? Or genus?

The Great Appeal

Perhaps the great appeal over slimline cards is that they are unique. After all, as card makers we are choosing to be different. Before I started making my own cards, giving someone a store bought card that someone else had picked out too made my card seem…very ordinary.

The size of a slimline card is unexpected. The stature is tall, stately and elegant. Because a slimline card is so long, it appears more valuable. And lets face it, because they are relatively new to the card making scene, they are novel as well.

Slimline Challenges

You would think cutting cardstock and decorating it to create a card should be easy, no matter the card base size. Slimline cards come with their own difficulties just the same.

First, you have to get over the fact that one sheet of 8-1/2 x 11″ cardstock will not yield you 2 card bases. And getting value out of Designer Series Paper that comes in sizes 6 x 6″ or 12 x 12″ is hard too. Of course it can be done! But the frugal crafter in me struggles with this a bit.

Then, there is design and spacing to address. With the narrowness of the slimline card, many stamps and dies may not actually fit well.

Autumn Greeting Stamp Set and Autumn Essentials Dies — Some of these stamps and dies from the Autumn Greetings Stamp Set and Autumn Essentials Dies will work on a slimline card, but some will be too large.

And when it comes to dry embossing on paper, embossing folders will run short. Most embossing folders are @4 x 6″ or 6 x 6″ in size. The cardstock shown here is 3-1/4 x 8-1/4″, cut to fit as the first layer over the slimline card base.

Using embossing folders with slimline card dimensions can be a challenge. — This cardstock, intended for slimline card layers, overhangs the Old World Paper and Dainty Diamonds Embossing Folders.

Getting Crafty With Slimline Cards

When has a challenge or two ever stopped a determined card maker? There are ways and work-arounds in the diverse world of crafting! And getting creative is really what it is all about, anyway.

I find the slimline cards perfect for the small to medium size stamps and dies. My first few slimline card attempts all used the same card layout, involving 3 evenly spaced rectangles. By starting with this design, I was able to focus on each section individually. I did not get overwhelmed with the large blank canvas the slimline card provides.

Autumn themed slimline card. — The dimensions, or basic card recipe, for this slimline card is listed here. This card features the Basket Of Blooms Stamp Set.

The Envelope, Please

Is it weird that one of my favorite things about the slimline card style is that it fits into a business size envelope?

The Peel & Seel envelopes do not self-seal in humidity, and don’t require any licking for sticking!

There are so many envelope sizes available, and of course I want one that fits my homemade card well. Not too big that my card is swimming, and not too small that the card barely fits inside.

You may make your own envelopes if you want the perfect size. My personal idea of bliss is opening my office supply drawer and pulling out a business size envelope and calling it a day. These types of envelopes are so easy to come by. I love that.

My Slimline Card Journey Continues

I have just gotten started in my dive into slimline cards. Next, I plan to involve the entire card front in one cohesive design, without breaking up the scheme. And the process of something new and exciting is a pleasing one.

Do slimline cards excite you, too? If you haven’t tried it yet, I encourage you to get crafty. My online store is always open if you need some supplies to help you with your creativity adventure.

Make sure you come back to see me, and find out what I have been up to as I continue to explore slimline cards, and more!

Slimline Zany Zebra Card

August 17, 2020

Monday’s Are Hard, Stamping Shouldn’t Be

Monday’s are hard, but in this card making series, I will show you that stamping shouldn’t be. In fact, it’s quite easy. And with minimal supplies and minimal efforts, you can get fabulous results!

Today’s Monday card is a little bit different! I am combining the latest fad, Slimline Cards, with easy Monday stamping. And to help me out, I called upon some adorable zebras for my Slimline Zany Zebra Card.

Minimal supplies for this Slimline Zany Zebra Card include one stamp set, Zany Zebras, and one ink pad, Memento Black Ink. The cardstock colors are black and white, and for fun I mixed in lots of colorful scraps. This card is a great way to use up some of your stash in style!

A Monday Card

Slimline Card Recipe

Basic Black CS: 8-1/2 x 7″, score 7″ side at 3-1/2″

Basic Black CS: 5/8 x 2″

Whisper White CS: 8-1/4 x 3-1/4″ x 2 (one for inside)

Whisper White CS: 2-1/4 x 2-1/2″ (x 3), 1/2 x 1-7/8″

Multi Color CS: 2-1/2 x 2-3/4″ (x 3), 3/4 x 3/4″ (x 6), scraps for hats

Slimline Card Base Tips

To create a slimline card base, you need cardstock sized 8-1/2 x 7″. The easiest way to accomplish this is to cut 4″ off the 11″ end of your 8-1/2 x 11″ sheet of paper. That way you won’t need to “open up” your paper trimmer to get past the typical 6″ of measurement.

Cutting cardstock for the slimline card base

Next, you will need to fold the base in half. I find it best to keep the paper in my trimmer as oriented and cut above, and score at 3-1/2″. You can also use your bone folder to fold and burnish your card base. Just make sure it is the 7″ side you are folding in half.

Let’s Get Stamping!

This easy Monday Slimline Zany Zebra Card only uses one ink color, black, so it is easy to stamp everything at once. I started by stamping each of the three zebra images from the Zany Zebra Stamp Set onto pieces of 2-1/4 x 2-1/2″ Whisper White CS. The 2-1/4″ width is the top and the 2-1/2″ length is the side.

While the ink is still out, I stamped my sentiment, “kick up your heels!” onto the 1/2 x 1-7/8″ Whisper White CS. There are 4 additional sentiments in the Zany Zebra Stamp Set to choose from.

Additional stamping with the Zany Zebra Stamp Set

I also used some colorful cardstock scraps to make party hats. After stamping my hats, I used my Paper Snips to fussy cut them. This is not as hard as it looks, and I was able to do it quickly.

Assemble With Ease

Now it is time for the assembly process. I started by adhering one of the 8-1/4 x 3-1/4″ Whisper White panels to the front of the card base. Next, I adhered my stamped sentiment to the 5/8 x 2″ piece of Basic Black CS, giving it a matted look.

I also attached each stamped zany zebra to a piece of colorful 2-1/2 x 2-3/4″ cardstock. In my sample card, I used Daffodil Delight, Gorgeous Grape and Granny Apple Green. After dry fitting the zebras to the front of my card, I glued them in place.

Assembling layers for the Slimline Colorful Zany Zebra card

Enhancing With Color

Because my Slimline Zany Zebra Card is mostly black and white, I wanted to add color thru my use of cardstock. I chose this option rather than a coloring medium like watercolor pencils, markers or even additional ink pads. It is a great way to use up small scraps!

For every 3/4 x 3/4″ colorful scrap, I was able to get 2 perfect triangle corners. I used my Paper Snips to cut directly from one point diagonally to the opposite corner. By cutting in one complete motion, you will have a better opportunity to get straight and even triangles.

Creating triangle accent pieces with coloful cardstock for the Slimline Zany Zebra Card — For this card I used Coastal Cabana, Bermuda Bay, Flirty Flamingo, Calypso Coral, Pool Party and Balmy Blue Cardstock.

I added 2 triangle colors to each of my zany zebra pieces, keeping the same color in opposite corners. It is best to play around and find the color combination you prefer before you start permanently adhering them. And this is good advice in regards to the zebra party hats as well!

The last thing I added to the card front was the sentiment piece. I placed glue adhesive on the triangles it rests on, instead of the entire back of the sentiment surface. Because the sentiment sits up on the triangles, not all of the back of it touches the card base.

The Insider Job

You may know that I like to continue stamping on the inside of my cards, bringing continuity from the front. For the slimline style cards, there is plenty of room on the inside to stamp!

Stamping Zany Zebras on the inside of the card

Here, I chose one of the zany zebras to stamp. I also added some small stars in the upper corner, and squiggly ground next to my zebra’s hooves. Earlier, I had cut out quite a variety of party hats, so one of my “left-overs” worked perfectly for my inside zebra.

Inside card stamping and envelope stamping using Zany Zebras stamp set

Don’t forget to give your envelope some love! The slimline cards fit well into a regular business size envelope (the envelope measures the standard 4.13 x 9.5″). This gives great appeal to slimline cards, as the envelopes are so easy to come by. I simply raided my office supplies for mine.

Mail A Slimline Card Today

Slimline cards are really easy to make. Perhaps the allure is the different shape to work with, long and rectangular. As card artists, we seem to enjoy mixing it up whenever we can.

Out of curiosity, and because I like to make a hefty card with lots of layers, I pulled out my scale to weigh my card in it’s envelope. This slimline card just made the weight limit for one first class postage stamp. If you add any additional elements to my recipe above, you may need additional postage.

Slimline Options

There are lots of options when it comes to a slimline card profile. Slimline cards are very on trend right now, so a quick search will yield you tons of ideas. I took this same card recipe and changed it up a bit, myself.

As you can see in my autumn card, the recipe is the same, minus the corner pieces. I swapped out the layer of Whisper White CS for Gilded Autumn Specialty Designer Series Paper (item #153520). I added die cut leaves (Gathered Leaves Dies, item #150662) using Brushed Metallic CS (item #153524), Embroidered Ribbon (item #153554) and Metallic Pearls (item #146282). Finally, I heat embossed the sentiment from the Gather Together Stamp Set (item #150589) in Gold Embossing Powder (item #109129).

Slimline Inspiration

I hope my Monday card (and alternate card) have inspired you to try making a slimline card as well. My video tutorial can be found on my FaceBook page, as well as my YouTube channel.

As always, my online store is open at any time to get the supplies you need to create beautiful projects in your own craft room. Be sure to share what you love to make with others!

And see you next Monday for another installment of: Monday’s Are Hard, Stamping Shouldn’t Be. We will continue to explore easy cards for the hardest day of the week!

Ornamental Gift Card Holder Card

August 10, 2020

Monday’s Are Hard, Stamping Shouldn’t Be

Monday’s are hard, but in this cardmaking series, I will show you that stamping shouldn’t be. In fact, it’s quite easy. And with minimal supplies and minimal efforts, you can get fabulous results! But…

Today’s Monday Card changes things up a bit. Instead of my usual recipe for one stamp set, two colors of ink and two colors of cardstock, for our gift card holder card we are using more!

How much more? For starters, an extra stamp set. I used Ornamental Envelopes and Itty Bitty Birthdays. I also used Designer Series Paper from the Brights Collection. And, to top it off, the Envelopes Dies and a Big Shot die cutting machine.

Easy???

Yes. This gift card holder card is still easy. In fact, you could make it without the dies. You could use whatever colors of cardstock and ink you prefer. You could change up the designer series paper (DSP). All you need is the basic recipe!

The Gift Card Holder Card Recipe

Melon Mambo CS: 4-1/4 x 11″, score at 5-1/2″ for card base.

Whisper White CS: 4 x 5-1/4″, (2) of 3 x 4″, 3/4 x 3″, scrap

DSP: 2-3/4 x 4″, 2 x 3″

Card Base Basics

The card base for this gift card holder card is not standard. It may be hard to break the habit of cutting your cardstock in half horizontally. After cutting the paper to 4-1/4 x 11″ (portrait orientation), score the 11″ length in half at 5-1/2″.

Next, you will need to cut 2-1/4″ off of one end of the cardstock. You can save this piece for another use, we won’t need it for this card.

Die Cutting Effects

This gift card holder card takes advantage of the Envelopes Dies to create our pocket for the gift card. I used the smallest of the envelope liner dies and some DSP to create my pocket.

Next, I used my Paper Snips to trim away the excess flap. I folded the top of my liner down and scored the edge with my bone folder to finish creating my pocket. The polka dot pattern remains on the outside (bottom), and the faded pattern shows at the top.

Additionally, I used an accent die from the Envelopes Dies to create a cut-away border on the top and bottom of one of the 3 x 4″ pieces of Whisper White CS.

Simple Stamping

My Monday Cards require as much simpleness as possible. For this gift card holder card, I only used one color of ink, Melon Mambo for my sample, and Bermuda Bay in my video tutorial.

I started with the remaining piece of 3 x 4″ Whisper White CS, and stamped in both upper corners with a stamp from the Ornamental Envelopes Stamp Set. I added an additional accent stamp in the top middle too. Next, I stamped my sentiment from the Itty Bitty Birthdays Stamp Set on the 3/4 x 3″ white cs.

Adding stamped images to the smaller panel

On the 4 x 5-1/4″ piece of Whisper White CS, I made sure to stamp on the edge that would be revealed when the card is in the closed position. I chose “it’s your day!” from the Itty Bitty Birthdays Stamp Set, and completed the look with the confetti stamp from Ornamental Envelopes.

And Repeat

The last bit of stamping also requires the last bit of die cutting. I stamped the trio flower stamp from the Ornamental Envelopes Stamp Set onto a scrap of white cs. Lastly, I die cut it with the coordinating die from the Envelopes Dies. The die cuts out 3 individual flowers!

Cutting the trio of flowers using the Envelopes Dies

Quick Assembly

The gift card holder card goes together easily! For the front, I layered the die cut Whisper White piece, the 2 x 3″ DSP and the sentiment piece, in that order.

Front of gift card holder card, assembled

I placed the stamped 3 x 4″ Whisper White piece on the backside of the card front. Then, I carefully added adhesive to only the outer sides and bottom edge of my die cut pocket.

Glue adhesive on the back pocket of the gift card holder

I added this gift card pocket to the bottom of the white panel, making sure there was room to add a gift card. If you use too much glue or tape adhesive, the gift card will not fit in the slot.

Assembled inside panel of gift card holder card, with pocket — I added a small drop of Tombow Liquid Glue to the pocket flap to hold it down. Next, I glued on the largest of my die cut flowers as an accent piece.

The large 4 x 5-1/4″ Whisper White panel needs to be adhered to the gift card holder card base, and assembly is complete! All that remains is adding a gift card and gifting this card away!

Gift Cards Galore

Gift cards remain a popular choice, and sticking one willy-nilly into a card creates awkward moments when the recipient opens it. This gift card holder card gives you the option to secure your gift card, and make the present far more ‘presentable’!

I hope you enjoyed this stepped up version of a Monday’s Are Hard, Stamping Shouldn’t Be Card. If you would like to watch my video tutorial on assembling this card from start to finish, you will find it on my FaceBook Page or YouTube Channel.

And if you need any supplies to create this great card, head over to my online store, where you will be sure to find everything and then some! Tune in next week for more quick and easy Monday style stamping with me!