Enjoy The Moment in Soft Succulent

Finished card with the Enjoy The Moment Stamp Set

In Color: Soft Succulent Part III

In this final installment of Soft Succulent, I have another color pairing that will help you enjoy the moment you discover how nicely they coordinate. For this card, I am using So Saffron and Early Espresso along with Soft Succulent.

I have really enjoyed my moments with Soft Succulent. It is such a warm gray-green color; it sometimes lends itself toward blue. And mixing in Early Espresso is easy, this deep and rich neutral brown always shines. But, So Saffron has never been my favorite yellow. However, once I began to work this subtle color in, it started to grow on me.

Enjoy The Moment

With my color palette of green, brown and yellow, I wanted a nature themed card. My first thought was some lovely autumn leaves or trees. But as I thumbed through the Stampin’ Up! Annual Catalog, another stamp set caught my eye: Enjoy The Moment.

The Enjoy The Moment Stamp Set has great sketch style images of various seed pods, nuts, seeds and the like. I began with the largest image, the trio of seed pods, and stamped it using VersaMark Ink on Water Color Paper. Next, I added Copper Metallic Embossing Powder and heat set it with my Heat Tool.

Heat embossing with a stamp from Enjoy The Moment Stamp Set

TIP: Keep a small generic paintbrush handy to swipe away loose particles of embossing powder from your paper before you heat emboss it. This will help minimize stray powder from being a permanent fixture.

Moments of Watercoloring

After my focal point image was heat embossed, I began to watercolor the image and surrounding paper. I started by placing a single drop of ink refill from Early Espresso, Soft Succulent and So Saffron onto a Clear Acrylic Block. By keeping the refill bottles near the corner of the clear block that coordinates with the ink drops, I know what color is where at a glance.

Ink Refills for watercoloring

I started with the Early Espresso Ink Refill drop and my smallest Water Painter Brush. With a small squeeze of the barrel, I mixed some water with the ink. Then, I covered the middle of my embossed seed pod trio.

Watercoloring with Early Espresso Ink Refill

Next, I moved onto the medium Water Painter Brush and the Soft Succulent Ink Refill drop. Again, I added some water from my Water Painter barrel to the ink drop to lighten the color and make it easier to water wash with. I swept the color along the bottom and sides of the embossed stem.

Watercoloring with Soft Succulent Ink Refill

Lastly, I used the largest Water Painter Brush and the So Saffron Ink Refill drop. I took care to not run the yellow into either the brown or green. This way, each color would stand out on its own.

Watercoloring with So Saffron Ink Refill

TIP: Cleaning Your Water Painter Brushes

Squeeze some water from the barrel and let it wash over the brush end. At the same time, use either a baby wipe or a paper towel to wipe away the inky remains. It is okay if your brush ends are stained. As long as no ink transfers when you swipe the bristles, you are good to go!

Cleaning Water Painters

Enjoying Background Stamping

There is not a lot of designer series paper in either Early Espresso or So Saffron that I could use on my card. So instead, I created my own.

On a layer of So Saffron Cardstock, I stamped the hanging thistle image from the Enjoy The Moment Stamp Set, using So Saffron Ink. By using tone on tone ink to paper, the result is noticeable but not glaring.

Background stamping using Enjoy The Moment Stamp Set on So Saffron Cardstock

I repeated tone on tone stamping using Early Espresso Cardstock and Early Espresso Ink. This time, I chose the small trio of seeds from the Enjoy The Moment Stamp Set. The petite size was perfect, and instead of stamping all four sides, I stuck with just one edge.

Background stamping using the Enjoy The Moment Stamp Set and Early Espresso Cardstock

Checks & Dots

When it came time to add texture to my card, I looked for just the right embossing folder. Of course, I didn’t want anything floral. Bricks and animal print were not even considered. I wanted something neutral, almost masculine.

So, I turned to the Checks & Dots Embossing Folders. They are sold as a pack of two, one is checks and the other is dots. These slim folders measure 3-3/8” wide, perfect for smaller embossing machines, like the Mini Stampin’ Cut & Emboss Machine. They are also perfect for smaller pieces of cardstock, like my Soft Succulent. Did you know the black line along the bottom of the folder will help you to line up your paper straight when preparing it for embossing?

Checks Embossing Folder

Great Grapevines

Usually, I am adding swirly leaves and flowers to my card designs. Since this card is more “natural” and masculine themed, I had to look for something a little different.

The Grapevine Dies are perfect for my need of ‘swirly’. The large die bends around in a lovely L shape, sending shoots of leaves and vines along the way. I die cut this in Watercolor Paper with my Stampin’ Cut & Emboss Machine. Because this paper is thicker (to hold watercolor washing), it may require some removal of small cut pieces. To make quick clean-up of my die cut. I use the Take Your Pick Die Brush Tip on my Take Your Pick Tool.

Take Your Pick Tool with Take Your Pick Die Brush Tip

TIP: It is easy to switch up all the tool heads on the Take Your Pick Tool, but I prefer to have 2 of the Take Your Pick Tools so that my tool is ready to go without swapping back and forth. And the foam pad that comes with the Take Your Pick Die Brush Tip fits nicely in a clear Standard Stamp Case for storage.

After cleaning up my grapevine, I gave it a watercolor wash using my Water Painter Brush and some more Soft Succulent Ink Refill.

Grapevine Die and watercoloring

Sprigs And Sentiment

My card layers are starting to develop nicely, so it’s time to look for the right sentiment for my card. I love generic sentiments when I am not sure who my card is going to, or what occasion it may eventually cover.

The “a little note…” stamp from the Enjoy The Moment Stamp Set is perfect in this instance. I chose to heat emboss it on a small slip of Early Espresso Cardstock. First, I applied VersaMark Ink, then covered my wet stamping in Copper Metallic Embossing Powder. Lastly, I heat set the powder using my Heat Tool. The copper shine of the sentiment mimics the embossed focal point.

Heat embossing the sentiment from Enjoy the Moment Stamp Set

Because there are no coordinating dies or a punch for the Enjoy The Moment Stamp Set, I am free to try different products where needed. I chose the Sprig Punch to add a decorative touch behind my sentiment. This time, I punched Soft Saffron Designer Series Paper from the Subtles Collection.

Sprig Punch and So Saffron DSP

Enjoy The Moment Base Assembly

Once I have everything stamped, die cut, punched, colored, embossed and prepared, it is time to put the card together. I started with an Early Espresso Cardstock base, then added my background stamped So Saffron piece, followed by my Checks embossed Soft Succulent.

Base Layers for the Enjoy The Moment Card

Next, I adhered the large leaves of the grapevine die down on my card front. I found it easiest to place the image where I wanted it to go, then lift the large leaves and added a drop of glue behind each. This was much easier than adding Mulitpurpose Liquid Glue to all of it and trying to place it precisely in one motion.

Adhering Grapevine Die Cut

Enjoy The Moment Focal Assembly

Before I went too far with my focal point, I decided to do a rough tear along one edge. I also added a little Early Espresso Ink with a sponge along the opposite side. Although Stampin’ Up! retired their round sponges, I keep mine handy for small jobs like this.

Tearing and sponging the focal piece

My focal point layers consist of the watercolor paper, the edge stamped Early Espresso Cardstock and another piece of plain So Saffron Cardstock.

Foacl point layer assembly

As I prepare to attach the focal point to the front of my card, I realize I have a lot of odd layer depths. My quick fix for this is to add a piece of like color cardstock to the back. This helps to raise up the “lower” side and make it lay flat when I adhere it to my card. By using the same color, it blends in beautifully if viewed from a side angle.

Adding a little lift to the layer with additional cardstock
Preparing the focal point for adhering to the card front

Before I could adhere the sentiment, I needed to place my sprig punched pieces. After a dry fit, I stuck them down with some Tear & Tape. I always place my tape in a manner that will be covered by another layer. In this instance, the tape also artfully secures some sweeping Linen Thread.

Adding sprig punched pieces and Linen Thread to card

The very last thing that I attached to my card was the sentiment. Because there were some bumps and lumps from the Linen Thread to cover up, I chose to place Mini Stampin’ Dimensionals on the back of my sentiment piece. This bit of “lift” helps give the sentiment prominence too.

Adding sentiment with Mini Stampin' Dimensionals

Soft Succulent Moments

I have truly enjoyed my color exploration of the 2021-2023 In Color, Soft Succulent. To see my last card and color combo with this great green, click here. And don’t despair because we are done exploring Soft Succulent, there is still one more new In Color to delight us in November.

Do you need any of the products I used here for your next creation? Make sure you stop by my online store at any time and enjoy the moment of shopping for your stamping supplies! Until next time, stay inspired!

Finished Enjoy The Moment Card

Tidings & Trimmings In Soft Succulent

Finished Tidings & Trimmings Card using Soft Succulent, Rich Razzleberry and Mint Macaron

In Color: Soft Succulent Part I

Papercrafters everywhere are thinking thoughts of Christmas as October deepens. While I turn to another 2021-2023 In Color, Soft Succulent, I am thinking Christmas too.

This soft, calm green shade may remind you more of spring, but don’t let it fool you. I find that Soft Succulent can hold its own along with Real Red and Cherry Cobbler for festive makings.

In fact, for this card, my challenge is to use Rich Razzleberry, a tone that lends towards purple. Along with Rich Razzleberry, I am tasked to use Mint Macaron. Mint Mac and Soft Succulent are very similar shades, but I was able to work all three of these colors cohesively for my Tidings & Trimmings Card.

Snowy White

I adore the sweet stockings from the Tidings & Trimmings Stamp Set. You will discover two different designs to choose from. And the good news is, they both fit the same die from the Christmas Trimmings Dies.

With my stockings, I wanted to use some colorful cardstock as the base. Rather than just stamping ink on top of my Soft Succulent cardstock and Rich Razzlebery cardstock, I chose to heat emboss instead. First, I stamped the stocking image using Versamark Ink. Next, I sprinkled on white embossing powder and set the powder with my Heat Tool. Then I ran each stocking thru my Stampin’ Cut & Emboss Machine to die cut it out.

Stockings heat embossed with white embossing powder and die cut with the Christmas Trimmings Dies.

*TIP: While prepping your paper for embossing, attach the cardstock to a clothespin or clip first. Hold on to the clothespin rather than the paper to prevent the Heat Tool from burning your fingers.

To top off my stockings, I chose to use the tied ribbon bow stamp from the Tidings & Trimmings Stamp Set. Again, I used Versamark Ink and white embossing powder, then heat set my bows. I chose a Rich Razzleberry bow for my Soft Succulent Stocking, and a Mint Macaron bow for my Rich Razzleberry Stocking. The white embossing brings the look together and adds elegance too.

Bow ribbon from the Tidings & Trimmings Stamp Set, stamped in Versamark and embossed with white powder.

Paper Delight

Even though I looked high and low for some Christmas designer paper in Rich Razzleberry, I could not find any. Instead, I chose a neutral design from what could be considered a fall pack of paper, Blackberry Beauty Specialty DSP.

Blackberry Beauty Specialty Designer Series Paper.

Barely noticeable but significant just the same, is the tone on tone stamping on the Rich Razzleberry Designer Series Paper. I measured my paper to stamp the berry sprigs from the Tidings & Trimmings Stamp Set in Rich Razzleberry Ink. By stamping in just the right location, my design elements would be accented.

Stamping a sprig from the Tidings & Trimmings Stamp Set on the designer series paper using Rich Razzleberry Ink for tone on tone.

As a fan of adding a lot of layers to my card fronts, I started with a Thick White Cardstock base. The thicker cardstock really holds up to the task at hand! Next, I added a layer of Rich Razzleberry CS, followed by Soft Succulent CS. Then, came the pretty designer series paper.

My card layers in Basic White, Rich Razzleberry, Soft Succulent and the berry colored designer series paper from Blackberry Beauty Specialty DSP>

And to add even more texture to my card, along with the heat embossing, I chose to use the Snowy White Velvet Sheets. From the Christmas Trimmings Dies, I chose 3 different “sprig’ dies from the Christmas Trimmings Dies and die cut them from this fuzzy velvet paper using my Stampin’ Cut & Emboss Machine. These sprigs look adorable peeping out of the tops of my Christmas stockings. They also add a brightness to this card.

Die cutting holly sprigs from Snowy White Velvet Sheet using the Christmas Trimmings sprig dies.

Stamping Sentiments

I chose two sentiments to work with from the Tidings & Trimmings Stamp Set. The scripty “Noel” is a timeless classic. I wanted to keep it front and center, so I stamped it in Versamark Ink on Soft Succulent CS. After that, I heat embossed it using white embossing powder.

Heat embossing the sentiment "Noel" in white embossing powder with my Heat Tool.

Next, I used the sentiment “May your days be merry & bright”. Again, I stamped in Versamark Ink, but this time only used the ink as a watermark image. Against my Mint Macaron CS, it shows very lightly and subtly in the background. By using Versarmark Ink instead of Mint Macaron Ink (tone on tone), I was able to keep my sentiment light and simplistic.

Background stamping a sentiment image using Versamark Ink.

Tidings & Trimmings Together

I felt that my stockings needed a little holly. With the Christmas Tidings Dies, this was an easy fix. There are two holly dies, but you will end up with four individual holly leaves after die cutting. How awesome is that? I chose Evening Evergreen CS as a great complimentary green for this particular task.

Die cut hollly leaves in Evening Evergreen from the Christmas Trimmings Dies.

After adding my sentiment pieces to my card front, it was time to add my stockings and the trimmings. I glued the holly leaves and bows to each stocking first, using Multipurpose Liquid Glue. This made it easy for me to later place the decorated stockings on my card front.

Adding the holly and ribbons to the stockings using Liquid Glue Adhesive.

My next step was a dry fit for the Snowy White Velvet die cut sprigs and my stockings. A dry fit is when you put elements on your card front without adding any adhesive. You can move parts and pieces around as you decide where you want them to go.

When I was happy with the sprig placement, I removed the stockings and taped the base of my sprigs in place. I prefer to use Tear & Tape Adhesive for jobs like this.

Adhering the Snowy White Velvet die cut sprigs with Tar & Tape Adhesive.

Next, I simply glued down my stockings over the taped down sprigs. The stockings interlocked just slightly in a natural position. You can see that they are off-set in height nicely too.

Adhering the stockings to the card front.

To complete my card, I chose to add a few Pearl Basic Jewels. With all the white elements on this card, these pearls look very natural. I find it easiest to place adhesive backed embellishments on my projects using the Take Your Pick Tool.

Adding Pearl Basic Jewels using the Take Your Pick Tool.

Soft Succulent Success

If you enjoyed this Christmas card using Soft Succulent and the Tidings & Trimmings Bundle, please stop by my online store for the supplies you need to re-create it. Did you know that by purchasing the bundle instead of adding the stamp set and dies to your cart individually, you will automatically save 10%?

For another Christmas style card using the In Color, Evening Evergreen, click here. I have also explored Christmas cards in Polished Pink and Fresh Freesia.

My In Color exploration will continue with Soft Succulent, so be sure to come back and visit to see my next color combos and creations! It is with great joy that I experiment with color and delight you with my  efforts.

Finished card using the Tidings & Trimmings Stamp Set.