Quick Cards

Lovely You In Rich Razzleberry

Monday’s Are Hard, Stamping Shouldn’t Be

Card made with Lovely You Stamp Set

Monday’s are hard, but in this cardmaking series, I will show you that stamping shouldn’t be. In fact, it’s quite easy. And with minimal supplies and minimal efforts, you can get fabulous results!

Lovely You Stamp Set

Today’s Monday Card features the stamp set Lovely You. This is a new stamp set from the 2020-2021 Annual Catalog from Stampin’ Up!. If you would like to see another easy Monday card that features flowers, click here.

You can purchase Lovely You as a bundle with the Lovely Labels Pick A Punch and save 10%. However, since we are using minimal supplies, this Monday Card only uses the stamp set. But more on the punch later!

Lovely You Stamp Set
Lovely You Stamp Set, item #152525

That’s right, one stamp set, Lovely You, two ink pads, Rich Razzleberry and Shaded Spruce, and two colors of cardstock, Rich Razzleberry and Whisper White. Please follow along!

A Monday Card

The Card Recipe

Rich Razzleberry CS: 5-1/2 x 8-1/2″, score at 4-1/4″ for card base.

Rich Razzleberry CS: 4 x 5-1/4″, 1-3/4 x 3-1/2″, ″ and 1 x 4″, small scrap

Whisper White CS: 4 x 5 1/4″ (for inside, optional)

Whisper White CS: 1-1/2 x 3-1/4″, 3/4 x 3-3/4″, (4 of) 3/4 x 5″, small scrap

Stamp And Assemble

This Monday’s Are Hard, Stamping Shouldn’t Be Card starts out with the typical “fold in half” and score with your bone folder to get a great crisp card base. Let’s not break tradition.

However, my TIP to you is to score once, invert the fold and score again. Your inner crease is now as crisp as the outer one. This makes for a professional looking card base!

Rich Razzleberry cardstock and bone folder

Create Your Own Designer Series Paper

With the minimal supplies used in this card, we are not adding designer series paper to it. We are making our own!

This great background pattern can be used with any stamp sets you own that contain small stamps and sentiments. It is a great way to use up some of those white strips of left-over paper that are lying around too!

I started with the Shaded Spruce Ink and 2 of the 3/4 x 5″ Whisper White strips. I used the three-leaf stamp from the Lovely You Stamp Set four times on one strip. Next, I used the sentiment “always”, and varied which letters from the word showed on my narrow paper strip.

Shaded Spruce Ink and stamps from Lovely You Stamp Set

After completing the Shaded Spruce strips, I worked on the Rich Razzleberry ones. On the two remaining strips, I stamped flowers from the Lovely You Stamp Set. I was able to get four of the larger flower images on one, and five of the smaller images on the other.

Rich Razzleberry Ink and stamps from Lovely You Stamp Set

After I stamped all four strips, I adhered them to a piece of 4 x 5-1/4″ Rich Razzleberry CS. I like to “dry fit” my pieces before permanently attaching them. This gives me time to see if I like the layout, and the ability to change my mind.

Layering stamped strips for card front

I kept my strips closer to the left, with a portion of the Rich Razzleberry visible on the right. There is room to play here, and you could easily separate the strips farther apart and fill the space instead.

Focal Stamping

This card has a lot of small stamps doing all the work. To anchor the sentiment, I continued by using Shaded Spruce Ink and the leaf sprig stamp from the Lovely You Stamp Set. But this time, I doubled the size by stamping the image twice, once up and once down.

Sprig leaf stamp from Lovely You Stamp Set

If there is an overlap in the middle, that is fine. The middle stamping will be covered up by the sentiment layer later on. I adhered this 1-1/2 x 3-1/4″ Whisper White CS to a panel of Rich Razzleberry CS, 1-3/4 x 3-1/2″.

So Many Sentiments

The Lovely You Stamp Set has 8 sentiments, along with 3 individual words. This stamp set has so much variety! I chose the sentiment “miles apart, but still in my heart”.

Sentiment stamp from Lovely You Stamp Set

When I stamped the sentiment in Rich Razzleberry Ink, I kept the image to the right of my 3/4 x 3-3/4″ Whisper White CS. Next, I adhered it to a layer of 1 x 4″ Rich Razzleberry CS.

Finishing Touches

The leaf sprig layer and sentiment layer need to be placed on the card. I placed the leaf sprig layer toward the left of the card, overlapping some of the smaller strips. The final position can be chosen to suit the background stamps in play.

When it came time to add the sentiment strip over the sprig assembly, the previous card layering left one end much lower. I solved this off-kilter situation by adding small pieces of Rich Razzleberry CS to the back of the sentiment layer where it needed a ‘bump’ up.

Adding cardstock bumps to create the proper height
The back of this sentiment piece needed to go up at least two levels,which I accomplished by adding small pieces of like-color cardstock in the appropriate area.

Fussy Details

Fussy cutting is not a favorite of most people. I try to keep mine to a minimum as well. But from time to time, it adds a needed detail to a card.

For this Monday card, I stamped the three-leaf stamp in Shaded Spruce, and the larger of the floral stamps in Rich Razzleberry onto a white scrap. Then, I did a little of the dreaded fussy cutting with my Paper Snips.

Fussy cut images from Lovely You Stamp Set

The middle of the fussy cut leaf will be covered by the flower, so it will not require the fussiest of cutting. The flower is easy to fussy cut, as just the head is needed. Lastly, I attached them to my card front, on the left of the sentiment piece.

Adding fussy cut pieces to card front

The Insider Job

Your card is beautiful on the outside, now lets make it pretty inside too! I like to mimic some of the outer stamping into a corner of the inside card. This way the card has continuity and there is still lots of room to add your own sentiment or written thoughts.

Here, I used the leaf sprig stamp and Shaded Spruce Ink first. I angled the image from the bottom corner toward the middle of the 4 x 5-1/4″ Whisper White CS. Next, I stamped the larger flower in Rich Razzleberry and added it on the side.

Inside stamping using Lovely You Stamp Set

Step It Up!

For my stepped up version of this same card, I pulled out the Lovely Labels Pick A Punch, which can be purchased at the same time as the stamp set for an instant 10% savings, using item #154070 when buying both.

Lovely Labels Pick A Punch, item #152883

Because this versatile punch removes a small amount of cardstock from the end, you will need to add 1/8″ to your cardstock measurement for each side that is punched. So, in my next card sample, I added 1/8″ to the four background strips, punching only one end. For the sentiment pieces, I added 1/4″, because I punched both ends.

Stepped up Lovely You Card
This stepped up card shows the work of the Lovely Labels Pick A Punch. I was able to use two different label ends (see layering strips and sentiment) with one punch.
  • Handy Tip: When cutting cardstock for the Lovely Labels Pick A Punch, you can choose 1/2″, 3/4″ or 1″ strips to fit in the channels. I find that the cardstock fits smoothly if I shave 1/16″ off the width from the stated sizes when cutting my paper.

In my stepped up Lovely You card, I also used the Tasteful Textile 3D Embossing Folder (item #152718) on the 4 x 5-1/4″ Rich Razzleberry CS to help define it. I used some retired Rich Razzleberry Ribbon and a gem from the Rhinestone Basic Jewels (item #144220) in the center of my flower.

Another Monday

I hope you enjoyed making this easy card on a hard Monday with me. My video tutorial can be found on my FaceBook page, as well as my YouTube channel. If you need any supplies for this card, please feel free to visit my online store, https://www.juliemakson.stampinup.net, at any time. See you next Monday for another installment of:

Monday’s Are Hard, Stamping Shouldn’t Be!

Painted Poppies in Poppy Parade

Monday’s Are Hard, Stamping Shouldn’t Be

Painted Poppies Card

Monday’s are hard, but in this cardmaking series, I will show you that stamping shouldn’t be. In fact, it’s quite easy. And with minimal supplies and minimal efforts, you can get fabulous results!

Painted Poppies Stamp Set

Today’s Monday Card features the Painted Poppies Stamp Set. This is a popular stamp set that was carried over from the January-June 2020 Mini Catalog from Stampin’ Up!. If you would like to see another floral Monday card, click here.

You can purchase the Painted Poppies Stamp Set as a bundle with the Painted Labels Dies and save 10%. However, since we are using minimal supplies, this Monday Card only uses the stamp set.

Painted Poppies Stamp Set, item #151599

That’s right, one stamp set, Painted Poppies, two ink pads, Poppy Parade and Memento Tuxedo Black, and two colors of cardstock, Poppy Parade and Whisper White. Please follow along!

A Monday Card

The Card Recipe

Poppy Parade CS: 5 1/2 x 8 1/2″, score at 4 1/4″ for card base.

Poppy Parade CS: 3-1/8 x 5-1/8″, 1-7/8 x 5″, (3 of) 3 x 1-1/2″

Whisper White CS: 4 x 5 1/4″ x 2 (one for inside, optional)

Whisper White CS: 3 x 5″, 1-3/4 x 5″, (3 of) 3 x 1-1/4″

Stamp And Assemble

This Monday’s Are Hard, Stamping Shouldn’t Be Card starts out with the typical “fold in half” and score with your bonefolder to get a great crisp card base. Let’s not break tradition.

However, my TIP to you is to score once, invert the fold and score again. Your inner crease is now as crisp as the outer one. This makes for a professional looking card base!

Poppy Parade card base and bonefolder

Create Your Own Designer Series Paper

With the minimal supplies used in this card, we are not adding designer series paper to it. We are making our own!

I began by stamping the image of mulitple poppies on their long stems, from the Painted Poppies Stamp Set. I used Memento Black Ink and the 3 x 5″ piece of Whisper White CS.

First, I turned the cardstock in the landscape position, and stamped the image twice, going across and keeping the taller poppies close to the paper’s edge. Next, I rotated the paper and did the same stamping on the opposite side. It is okay to overlap the ink coverage in the middle.

Stamping with Painted Poppies stamp set

Floral Details

The next bit of stamping creates the tiny details. I used 3 pieces of Whisper White CS, 1-1/4″ square. Using the large open poppy stamp from the Painted Poppies Stamp Set and Memento Black Ink, I stamped 2 of the 3 squares. I tried to get different coverage on each, and since the stamp is so much bigger than the paper, there is a lot of overflow!

For the third square, I stamped in Memento Black Ink using the smaller of the open poppy stamps from the Painted Poppies Stamp Set. This image fits better into the small space of the square, overflowing slightly.

Stamping with the open poppy stamps from Painted Poppies Stamp Set

Colorful Poppy Stamping

Our poppies need some color, and I used the Poppy Parade ink to fill them in. Using the solid shading stamp from the Painted Poppies Stamp Set, I stamped off once before stamping on to each of the three squares. This gives the ink coverage a lighter tone.

Stamping Off with the Painted Poppies Stamp Set shading stamp

To add additional color to my poppies and really make them “pop” I used the smaller splotchy stamp from the Painted Poppies Stamp Set and full strength Poppy Parade Ink. I stamped this image 3 times around the black center of each poppy. If you need to stamp 4 times to get complete coverage, that works fine as well.

Stamping the small splotch stamp from Painted Poppies Stamp Set around the center of the flower.

Layering Layers

This great card has a lot of layers! And they go together very easily. First, I adhered one of the 4 x 5-1/4″ Whisper White CS panels to the front of the card base. I also layered the stamped poppies in black to the Poppy Parade CS mat, sized 3-1/8 x 5-1/8″.

First Step layering for card

The matted poppies are ready for the card front, and I began to layer my next pieces together. This time, the plain Poppy Parade, 1-7/8 x 5″, and the plain Whisper White, 1-3/4 x 5″, went together. Notice that the height of both of these pieces is the same, so the matting is actually only along the sides here.

Layering card front part 2

Once the plain layers are added to the middle of the stamped poppies, the flower images look nice on either side and the messy middle is no longer visible. And the plain layer now looks like it has its own matted border along the top, due to paper sizing!

Layering card front pieces part 3

Each of the small white squares with a poppy gets its own Poppy Parade mat, size 1-1/2″ square as well. And this completes our layering process.

Squares Like Diamonds

The hardest part of making this easy card is lining up the poppy squares in a diamond pattern. I started with a dry fitting and moved the pieces around to get the right placement.

I chose to put the 2 similar poppy images on top and bottom, leaving the smaller stamped poppy in the middle. It is helpful to take advantage of the Poppy Parade CS mat edge when lining up the squares. I made sure the corner of each square did not go past the “red line”.

From there, it was just a matter of spacing in between each square. I adhered each one without moving the others off the card front, so I remembered where each one needed to be fit back on the card.

Finished card front using Painted Poppies Stamp Set

The Insider Job

Your card is beautiful on the outside, now lets make it pretty inside too! I like to mimic some of the outer stamping into a corner of the inside card. This way the card has continuity and there is still lots of room to add your own sentiment or written thoughts.

Here, I used the same technique from the stamping of the large poppy image and filler color from the Painted Poppy Stamp Set to add that inside interest.

Stamping inside the card with the Painted Poppies Stamp Set

Step It Up!

Sometimes more is more. If you have ribbon or adhesive gems in your craft room, they go so nicely with this card. Here, I used some retired Poppy Parade ribbon and the Frosted Epoxy Droplets (item #147801) to dress it up.

Dressed up Painted Poppy Card

I hope you enjoyed making this easy card on a hard Monday with me. My video tutorial can be found on my FaceBook page, as well as my YouTube channel. If you need any supplies for this card, please feel free to visit my online store, https://www.juliemakson.stampinup.net, at any time. See you next Monday for another installment of:

Monday’s Are Hard, Stamping Shouldn’t Be!

Daisy Lane In Pool Party

Monday’s Are Hard, Stamping Shouldn’t Be

Daisy Lane Stamp Set

Daisy Lane Card In Pool Party

Monday’s are hard, but with the Daisy Lane Stamp Set and this card making series, I will show you that stamping shouldn’t be. In fact, it’s quite easy. And with minimal supplies and minimal efforts, you can get fabulous results!

Today’s Monday Card features the stamp set, Daisy Lane, item #149325. This stamp set is not new to the 2020-2021 Annual Catalog from Stampin’ Up, but it is current. If you would like to see another easy Monday card featuring flowers, click here.

You can purchase 2 separate punches to coordinate with the Daisy Lane Stamp Set. There is a Daisy Punch, item #143713, for the larger daisy stamp and a Medium Daisy Punch, item #149517, for the smaller daisy stamp. However, since we are using minimal supplies, this Monday Card only uses the stamp set.

Daisy Lane Stamp Set

That’s right, one stamp set, Daisy Lane, two ink pads, Bermuda Bay and Shaded Spruce, and two colors of cardstock, Pool Party and Whisper White. Please follow along!

A Monday Card

The Card Recipe

Pool Party CS: 5-1/2 x 8-1/2″, score at 4-1/4″ for card base.

Pool Party CS: 3-1/4 x 4″, 3/4 x 4″″ and 2 x 4-3/4″

Whisper White CS: 4 x 5 1/4″ (for inside, optional)

Whisper White CS: 2-1/4 x 5″, 1-3/4 x 4-1/2″, 1-1/4 x 4″, and 1/2 x 2-1/2″

Stamp And Assemble

This Monday’s Are Hard, Stamping Shouldn’t Be Card starts out with the typical “fold in half” and score with your bone folder to get a great crisp card base. Let’s not break tradition.

However, my TIP to you is to score once, invert the fold and score again. Your inner crease is now as crisp as the outer one. This makes for a professional looking card base!

Pool Party Card Base and Bone Folder

Create Your Own Designer Series Paper

With the minimal supplies used in this card, we are not adding designer series paper to it. We are making our own! This great background pattern can be used with any stamp sets you own.

I suggest stamping on scrap paper, as this technique has you stamping off the edge of your cardstock. Starting with the 3-1/4 x 4″ Pool Party CS, stamp the fern leaf using Shaded Spruce Ink over the entire surface. Do the same with the 3/4 x 4″ Pool Party CS.

Fern leaf stamp from Daisy Lane Stamp Set
This stamp works well when overlapped, so don’t worry about stamping it as such!

Floral Details

Next, I worked with the focal point flower. I used the 1-3/4 x 4-1/2 piece of Whisper White CS. First, I stamped the stem from the Daisy Lane Stamp Set in Shaded Spruce. Next, I used Bermuda Bay Ink and the daisy flower stamp, stamping off, then on to the top of the stem. This creates a lighter flower image.

Because the flower image was stamped off and is lighter, the sentiment stamp “friend” from the Daisy Lane Stamp Set is well defined when stamped in full strength Bermuda Bay Ink at the top of the stem.

Daisy Flower stamped from Daisy Lane Stamp Set

Sentimental Use

I love to use sentiment stamps in unusual ways, and in this card, they keep coming! To accent my focal flower, I stamped the saying “It’s your time to shine” from the Daisy Lane Stamp Set using Shaded Spruce Ink on the 1/2 x 2-1/2″ white cs.

Cutting apart sentiment from Daisy Lane Stamp Set
Small leftover paper scraps from cutting cardstock to size work perfect for this.

Next, I used my Paper Snips to cut each individual word apart and trimmed them. Lastly, I adhered each word in the proper phrase order to the top of the leaves on my flower stem. I prefer Tombow Liquid Adhesive Glue for small jobs like this.

Adding sentiment to card

For the next bit of stamping, I used the sentiment, “The best moments in my life happen with you”, from the Daisy Lane Stamp Set. I stamped it 3 times in Shaded Spruce Ink on the 1-1/4 x 4″ white cs. I started on the left, stamped in the middle and finished on the right.

Following that, I stamped the medium open petal daisy stamp from the Daisy Lane Stamp Set over each stamped sentiment. For this inking, and to get a very light image, I used the Bermuda Bay Ink and stamped off twice before stamping on my white cs.

Sentiment and daisy stamping using the Daisy Lane Stamp Set

Putting It All Together

With the stamping for the outside completed, it is just a matter of putting the card puzzle pieces together. I began with the leafy background stamped images, choosing the largest one to adhere first. The smallest one fits on the bottom of the card front, with the long sentiment piece tucked in between.

Front of card assembly

The focal flower piece has additional matting to it. You can choose to omit some of the matting if you prefer. After putting my cardstock together, I added it to the front of the card toward the right . One “best moments” sentiment is clearly visible, while the additional two are only peeking out and implied.

The Insider Job

Your card is beautiful on the outside, now lets make it pretty inside too! I like to mimic some of the outer stamping into a corner of the inside card. This way the card has continuity and there is still lots of room to add your own sentiment or written thoughts.

Here, I used the same technique from the stamping of the stem in Shaded Spruce Ink and daisy flower in Bermuda Bay Ink, to add that inside interest. Because I was not stamping the friend sentiment, I did not stamp off when using the flower stamp. This gave me a bolder inside flower.

Inside stamping

Another Easy Monday

I hope you enjoyed making this easy card on a hard Monday with me. My video tutorial can be found on my FaceBook page, as well as my YouTube channel. If you need any supplies for this card, please feel free to visit my online store, https://www.juliemakson.stampinup.net, at any time. See you next Monday for another installment of:

Monday’s Are Hard, Stamping Shouldn’t Be!

Tasteful Touches In Cherry Cobbler

Monday’s Are Hard, Stamping Shouldn’t Be

Monday’s are hard, but in this cardmaking series, I will show you that stamping shouldn’t be. In fact, it’s quite easy. And with minimal supplies and minimal efforts, you can get fabulous results! To see another Monday style card, click here.

Today’s Monday Card features the stamp set, Tasteful Touches. This is a new stamp set in the 2020-2021 Annual Catalog from Stampin’ Up!. The stamp set is composed of 9 cling (red rubber) stamps.

Tasteful Touches Stamp Set
Tasteful Touches Stamp Set, Item #152562

You can purchase the Tasteful Touches Bundle, which includes the Tasteful Labels Dies, and save 10%. However, since we are using minimal supplies, this Monday Card only uses the stamp set.

Tasteful Labels Dies
The Tasteful Labels Dies, item # 152886, are available separately or bundled with the Tasteful Touches Stamp Set. To order the Tasteful Touches Bundle, use item #154098.

This Monday card is made with one stamp set, Tasteful Touches, two ink pads, Cherry Cobbler and Blushing Bride, and two colors of cardstock, Cherry Cobbler and Whisper White. Please follow along!

A Monday Card

The Card Recipe

Whisper White CS: 5-1/2 x 8-1/2″, score at 4-1/4″ for card base.

Whisper White CS: 3-3/4 x 5″, 2-1/2 x 2-1/2″, 1 x 3-1/2″, (3) of 1/2 x 5″

Cherry Cobbler CS: 4 x 5-1/4″, 2-3/4 x 2-3/4″, 1-1/4 x 3-3/4″

Stamp And Assemble

This Monday’s Are Hard, Stamping Shouldn’t Be Card starts out with the typical “fold in half” and score with your bone folder to get a great crisp card base. Let’s not break tradition.

However, my TIP to you is to score once, invert the fold and score again. Your inner crease is now as crisp as the outer one. This makes for a professional looking card base!

White Card Base and Bone Folder

Create Your Own Designer Series Paper

With the minimal supplies used in this card, we are not adding designer series paper to it. We are making our own! This is a great way to put all the stamps in your stamp set to good use.

I suggest stamping on scrap paper, as this technique has you stamping off the edge of your cardstock. Starting at the bottom left of the 3-1/2 x 5″ Whisper White CS, stamp the leaf sprig from the Tasteful Touches Stamp Set in Cherry Cobbler Ink, up toward the top. I was able to get 3 full images and a partial along the edge.

Tasteful Touches stamp. leaf sprig and Cherry Cobbler Ink

This is the perfect time to stamp the same leaves in Cherry Cobbler along one of the 1/2 x 5″ Whisper White strips of paper. This is also a wonderful use of those tiny strips of paper leftover from larger cuts!

More stamping in Cherry Cobler with leaf sprig from Tasteful Touches Stamp Set

Lastly, I stamped the floral background pattern from the Tasteful Touches Stamp Set in Blushing Bride on the remaining two strips of 1/2 x 5″ white cs. I placed the two strips side by side, to stamp them at the same time. You could stamp them one at a time if you prefer. It helps to hold one end of the paper down as you stamp.

Stamping a background image from Tasteful Touches Stamp Set in Blushing Bride

Floral Details

The focus of this great Monday card is the flower stamp from the Tasteful Touches Stamp Set. It really looks great in any color, but here we continue to use Cherry Cobbler Ink. I stamped it in the center of the 2-1/2 x 2-1/2″ Whisper White CS.

Flower Stamp from Tasteful Touches Stamp Set and Cherry Cobbler Ink

Next, to add additional interest, I stamped the flower background image along the top and bottom of the white cs. To create a lighter image, I stamped off after inking up with Blushing Bride, then used the second and third generation ink. The darker and lighter stamping matches in opposite corners.

Second and third generation stamping using the Tasteful Touches background flower stamp

So Sentimental

The last bit of stamping for the card front is the sentiment. I chose the stamp phrase “the good things in life are better with you” from the Tasteful Touches Stamp Set. I stamped this in the middle of the 1 x 3-1/2″ Whisper White CS, using Cherry Cobbler Ink.

Easy Assembly Required

Now that the stamping is done, it is time to assemble the card. The layers for this card go together very easily. I started by adhering the larger leaf sprig stamped cardstock to the Cherry Cobbler CS, sized 4 x 5-1/4″. Then, I placed this on my card base.

Beginning layers of card on base

Next, I added the 3 strips of 1/2 x 5″ stamped pieces. I began with the Cherry Cobbler leaf sprig stamped piece, and centered that, leaving room to add the Blushing Bride stamped pieces on either side. I also made sure to leave a small edge of white showing on the outer edge.

Phase 2 of layering the card pieces

The last two stamped pieces each have a Cherry Cobbler mat to be adhered to. I attached them together before adding them to the card front.

Adding Cherry Cobbler CS mats to stamped images from the Tasteful Touches Stamp Set

For the final step in creating the card front, I added the sentiment toward the bottom, leaving a half-inch of background stamping showing; after that, I added the flower piece, again leaving a half-inch of background stamping showing, this time from the top.

Finished card front

The Insider Job

This card is absolutely beautiful on the outside, lets make it pretty on the inside as well. I like to mimic some of the outer stamping into a corner of the inside card. This way the card has continuity and there is still lots of room to add your own sentiment or written thoughts.

Inside card stamping used Tasteful Touches Stamp Set

Here, I stamped the large flower in Cherry Cobbler Ink in the bottom corner of the inside. Next, I stamped the floral background image in Blushing Bride on either side. I only stamped half of the image (2 rows, instead of 4).

Colorful Combinations

This card went together so fast and easy, it inspired me to create more of the same, using different color combinations. The first example uses the same stamping colors as above, but I used Blushing Bride CS instead of Cherry Cobbler.

Tasteful Touches Card in Blushing Bride

My next example features the blues, Night of Navy and Seaside Spray to be exact. Same card recipe, different ink and cardstock.

Tasteful Touches Card in Night of Navy

For the next example, I turned to purple, Rich Razzleberry and Purple Posy. Because the Tasteful Touches Stamp Set is cling (red rubber), I was able to use my Purple Posy Stampin’ Write Marker to ink the stamp with for the lighter tones here.

Tasteful Touches Card in Rich Razzleberry

My last card example uses greens, Garden Green and Soft Sea Foam. This great card recipe made every card in any color combo quick to create.

Tasteful Touches Card in Garden Green

Get Inspired

I always get inspired by color when I create a new card. Having a stamp set like Tasteful Touches made this creation easy to complete as well.

I hope you enjoyed making this easy card on a hard Monday with me. My video tutorial can be found on my FaceBook page, as well as my YouTube channel. If you need any supplies for this card, please feel free to visit my online store, https://www.juliemakson.stampinup.net, at any time. See you next Monday for another installment of:

Monday’s Are Hard, Stamping Shouldn’t Be!

Butterfly Wishes In Smoky Slate

Monday’s Are Hard, Stamping Shouldn’t Be

Butterfly Wishes Card in Smoky Slate

Monday’s are hard, but in this cardmaking series, I will show you that stamping shouldn’t be. In fact, it’s quite easy. And with minimal supplies and minimal efforts, you can get fabulous results!

Butterfly Wishes Stamp Set

Today’s Monday Card features the stamp set, Butterfly Wishes. This wonderful stamp set is a carry-over to the new Stampin’ Up! 2020-2021 Annual Catalog. To see last Monday’s card, which also features a butterfly, click here.

Butterfly Wishes Stamp Set, item #149346

There are 2 stamps in this set that coordinate with the Butterfly Duet Punch. However, since we are using minimal supplies, this Monday Card only uses the stamp set.

Butterfly Duet Punch, item #148523, coordinates with the stamp set Butterfly Wishes, but we are not using the punch for our minimal supplies card.

That’s right, our minimal supplies include one stamp set, Butterfly Wishes, two ink pads, Basic Gray and Mango Melody, and two colors of cardstock, Smoky Slate and Whisper White. Please follow along!

A Monday Card

The Card Recipe

Smoky Slate CS: 5 1/2 x 8 1/2″, score at 4 1/4″ for card base.

Smoky Slate CS: 3 3/4 x 5″

Whisper White CS: 4 x 5 1/4″ x 2 (one for inside, optional)

Whisper White CS: 3 1/4 x 4 1/2″, 1 1/2 x 3 1/4″ and 1 x 3 ¼

Stamp And Assemble

This Monday’s Are Hard, Stamping Shouldn’t Be Card starts out with the typical “fold in half” and score with your bone folder to get a great crisp card base. Let’s not break tradition.

However, my TIP to you is to score once, invert the fold and score again. Your inner crease is now as crisp as the outer one. This makes for a professional looking card base!

Smoky Slate Cardstock and Bone Folder

Basic Stamping

I started with the branch stamp from the Butterfly Wishes Stamp Set. Using Basic Gray Ink, I placed this stamp at an angle about half-way down the 3 1/4 x 4 1/2″ Whisper White CS.

Branch stamp from Butterfly Wishes stsmp set
Notice the lighter areas of the stamped image. I did not miss ink coverage when I tapped my stamp in the ink pad. This is a DistINKtive Stamp, intended to give shading with high and low ink coverage.

My focus with the Butterfly Wishes Stamp Set is, of course, a butterfly. I chose the largest butterfly stamp and applied it to my white cs using Mango Melody Ink. I love that this butterfly is so realistic, and is floating with wings back.

Butterfly stamp from Butterfly Wishes Stamp Set in Mango Melody Ink

Generational Stamping I

This Monday card, as all my Monday cards, uses only 2 ink colors. So, to get the look of more than 2 ink colors, this card has generational stamping. That means we are using 1 ink color and getting lighter shaded images by stamping more than once with ink coverage on our stamp.

I brought in the flower stamp and my 1 1/2 x 3 1/4″ Whisper White CS. Next, I stamped in Mango Melody, using the full strength of ink along the edge of my white cs. This is the first generation stamping process.

Immediately after stamping the flower in full ink, I stamped it again in a random pattern on my larger white cs, as second and third generation stamping. Do not clean your stamp off in between applications. You will get lighter images with each generation of stamping.

Generational stamping with the Butterfly Wishes stamp set

Once I had enough light color flowers on the larger piece, I set it aside and continued to stamp fully inked flowers on the edge of my smaller white cs.

Flower stamp from Butterfly Wishes stamp set in Mango Melody

Generational Stamping II

With the great results of generational stamping in Mango Melody, I wanted to do the same with Basic Gray Ink. First, I brought in the Smoky Slate CS 3 3/4 x 5″, and began to stamp the sentiment, “A sweet friendship refreshes the soul” along the top outer edge.

I used the first generation of Basic Gray on the Smoky Slate CS, the applied second and third generations of ink on my larger white cs. I repeated the lighter generations 2 times.

Sentiment from Butterfly Wishes in Basic Gray with generational stamping

After my larger white cs was completed, I set it aside and focused on stamping the sentiment along the edges of the Smoky Slate CS. I find it easier to rotate the cardstock as I stamp the sentiment.

Sentiment stamping along outer edges completed

Sentiment Stamping

The last bit of stamping for the outside of the card went on the 1 x 3 1/4″ Whisper White CS for the sentiment. I used the medium butterfly from the Butterfly Wishes Stamp Set with Mango Melody. First I stamped off, then stamped onto my white cs, to get the lighter second generation image.

Second generation stamping with medium butterfly from Butterfly Wishes Stamp Set

Next, I used the smallest butterfly from the Butterfly Wishes Stamp Set, and with full strength Mango Melody ink, stamped directly over the medium butterfly. This was a little tricky using the Cling Red Rubber Stamp, as it is not see-through like the photopolymer style.

Smallest butterfly from Butterfly Wishes Stamp Set stamped over medium butterfly
This one is not lined up perfectly, but unless you are really looking hard, not horridly off. Home-made cards should have some flaws, right?

Lastly, I stamped the Birthday Wishes stamp from the Butterfly Wishes Stamp set in Basic Gray Ink.

Birthday Wishes stamp from Butterfly Wishes Stamp Set in Basic Gray Ink

Putting It All Together

Now it is time to add all those beautifully stamped layers together on the card front. These pieces lined up very easily! I started with 1 of the 4 x 5 1/4″ Whisper White CS pieces and adhered it to the card base. Next, I layered on the Smoky Slate piece with the sentiment stamped along the outer edges.

Beginning layers to card front

Following that assembly, I adhered together the sentiment and Mango Melody flower stamped pieces of Whisper White CS. I placed that on the large piece of white cs, leaving a small portion of plain white showing at the bottom. This card is very busy, and leaving a small section “void” gives the eyes a resting place.

Layers continue to build on the card front

This completed assembly went on the card front next. All of the layers used in this card line up and center nicely.

Card front completely assembled

The Insider Job

Your card is beautiful on the outside, now lets make it pretty inside too! I like to mimic some of the outer stamping into a corner of the inside card. This way the card has continuity and there is still lots of room to add your own sentiment or written thoughts.

Here, I used the the tree branch image in Basic Gray and the medium butterfly, stamped off in Mango Melody, to add that inside interest.

Inside card stamping using Butterfly Wishes stamp set

Step It Up!

I love to show you that stamping and making fabulous cards can be so easy. I also like to show you that if you have more and want to add more to your cards, you can!

For my stepped up version, I used the Butterfly Duet Punch, along with the 1 3/8″ Scallop Circle Punch on my sentiment piece. Additionally, I used some Whisper White Crinkled Seam Binding Ribbon and Basic Pearls.

Stepped Up version of the Butterfly Wishes Card

I hope you enjoyed making this easy card on a hard Monday with me. My video tutorial can be found on my FaceBook page, as well as my YouTube channel. If you need any supplies for this card, please feel free to visit my online store, https://www.juliemakson.stampinup.net, at any time. See you next Monday for another installment of:

Monday’s Are Hard, Stamping Shouldn’t Be!