Beauty of Tomorrow in Soft Succulent

Card using Beauty Of Tomorrow Bundle featuring Soft Succulent.

In Color: Soft Succulent Part II

As I began another color journey with Soft Succulent, I noted the color pairing with Soft Suede and Old Olive. My thoughts turned to fall colors immediately. But it was not an autumn themed stamp set that caught my eye as I started to design!

Instead, I chose the flora and fauna of the Beauty of Tomorrow Stamp Set and Beautiful Leaves Dies. The blue-green of the Soft Succulent blends so nicely with the warm brown of Soft Suede. Old Olive, almost a spring-time green, seemed like the odd man out here. But, once I tucked some Old Olive in, I discovered that I not only like these colors together…I love them together!

Big and Beautiful Leaves Dies

The largest die in the Beautiful Leaves Dies measures a whopping 6-1/4 x 4″. I needed a good sized piece of Old Olive Cardstock to use this background fern with my Stampin’ Cut & Emboss Machine. One pass thru, and you will have a lot of foliage to work into your own project too!

Large fern die from Beautiful Leaves Dies using Old Olive Cardstock.

You may be wondering how one would fit “all” of that green on one card front! I simply chose to chop mine up a bit. I wanted a little Old Olive peeping out from behind my focal point. With my Paper Snips, I trimmed this die cut apart. There was plenty left over for other card use, too.

Using Paper Snips to trim the large die cut from the Beauty of Leaves Dies.

Small Shimmery Leaves Dies

Not everything needs to be oversized! In fact, the Beautiful Leaves Dies feature four smaller dies for foliage too. Because I wanted my leaf color to vary, I chose to create the smaller leaves in Soft Succulent. For immediate and easy glimmer, I pulled out my 2021-2023 In Color Shimmer Vellum. A small piece of this fantastic vellum was all that I needed to die cut these leaves.

Die cutting smaller leaves from the Beauty of Leaves Dies, using 2021-2023 In Color Shimmer Vellum in Soft Succulent.

Beauty of Tomorrow Bouquets

One of the beautiful things about the Beauty of Tomorrow Stamp Set is that the sprig-like flowers are stamp and go. You don’t need to two-step stamp, or color the leaves and flowers in. They are simply gorgeous stamped once. And that is just what I did.

Stamping the sprig stamp from Beauty of Tomorrow Stamp Set in Soft Suede Ink.

I chose to stamp the larger sprig-like stamp from the Beauty of Tomorrow Stamp Set using Soft Suede Ink on Basic White Cardstock. For the smaller floral bouquet, I stamped the image using Soft Succulent Ink. After my stamping was complete, I used the coordinating dies from the Beautiful Leaves Dies and ran them thru my Stampin’ Cut & Emboss Machine.

Stamping the floral bouquet from the Beauty of Tomorrow Stamp Set using Soft Succulent ink.

Tastefully Stamped and Embossed

One of my favorite techniques to do is use a sentiment stamp as a background image. The large sentiment stamp from the Beauty of Tomorrow Stamp Set reads, “the changing of the leaves reminds us that new wonders are just around the corner”.

I chose to stamp this image using VersaMark Ink on a piece of Soft Succulent Cardstock. The effect of the watermark ink is subtle. I varied the placement of the stamped words, and although the image is not “readable”, one only has to look to see that there is a hidden message.

Stamping the sentiment stamp from Beauty of Tomorrow Stamp Set as a background stamp in VersaMark ink.

After my sentiment stamping was complete, I embossed my Soft Succulent Cardstock. The Tasteful Textile Embossing Folder leaves a barely discernible texture. The softness of this embossing adds to the richness of this card without being overpowering. Lastly, I used my Blending Brush and Soft Succulent Ink to deepen the outer edges of my cardstock.

Embossing with the Tasteful Textile Embossing Folder and sponging Soft Succulent Ink with a Blending Brush.

The Beauty of Assembly

Now it’s time to take a look at the layers of this card. I began with a Soft Succulent card base. Next, I added a layer of Soft Suede Cardstock. My third layering piece is Soft Succulent in nature, but comes from the Tidings of Christmas 6 x 6″ Designer Series Paper. This pattern worked wonderfully with my card, and did not lend itself to Christmas tidings at all.

Card layers for the front of the card.

Once I had my layering pieces adhered, I began to place my leafy die cuts. I started with the Old Olive snippings, and dry-fit them beneath my Soft Succulent embossed piece. When I was happy with the placement, I used Tear & Tape Adhesive to attach my greens to my card base. I am always careful to place the tape in a position I know will be covered up as I continue to build my card.

Attaching the Old Olive die cut leaves.

After my Old Olive leaves were in place, it was time for me to add in the shimmery Soft Succulent leaves. Again, I took care to place them in a peeping manner. I used more Tear & Tape Adhesive to secure these small leaves as well.

Attaching the shimmer vellum leaves.

Beautiful Embellishments

Every beautiful card needs some beautiful embellishments! For this card, I chose an elegant ribbon- the Very Vanilla Scalloped Laced Trim Ribbon. First, I placed my stamped and die-cut bouquets on the embossed Soft Succulent cardstock. Next, I wrapped a small piece of lace across the width, securing the lace in the back.

Using Very Vanilla Scalloped Lace Trim Ribbon on the card front.

From there, I created a small lacey bow, and attached that over the front. For an adhesive that really holds ribbons well, I recommend the Tear & Tape Adhesive. Once completed, I placed my entire assembly over the tape that is securing my leaves!

A bow in lace trim is added using Tear & Tape Adhesive.

I am loving the Brushed Metallic Adhesive Backed Dots! I chose 3 in the gold tone, and placed them in a row along the open space at the bottom of my card front. If you struggle to line up embellishments in a straight row, try doing this: use some Grid Paper (or graph paper) and a ruler as your guide. I also find the Take Your Pick Tool so helpful in lifting the adhesive embellishments off their backing paper and onto my project.

Using the Take Your Pick Tool to add Brushed Metallic Adhesive Backed Dots.

Nothing As Beautiful

This card featuring the Beauty of Tomorrow Bundle, along with Soft Succulent, Soft Suede and Old Olive, came together beautifully! As I worked with this color combination, I discovered that I really enjoy this mix. In fact, I could see myself creating some beach themed cards with these three colors.

If I have inspired you and you need some of the supplies I used to create this card, stop by my online store anytime. Need more Soft Succulent inspiration? Check out this card and an unusual color combination that may put you in the holiday spirit, by clicking here. And be sure to come back for the final installment of Soft Succulent and a new color combo that is sure to please!

One last look at the finished card!

Lovely You In Rich Razzleberry

Monday’s Are Hard, Stamping Shouldn’t Be

Card made with Lovely You Stamp Set

Monday’s are hard, but in this cardmaking series, I will show you that stamping shouldn’t be. In fact, it’s quite easy. And with minimal supplies and minimal efforts, you can get fabulous results!

Lovely You Stamp Set

Today’s Monday Card features the stamp set Lovely You. This is a new stamp set from the 2020-2021 Annual Catalog from Stampin’ Up!. If you would like to see another easy Monday card that features flowers, click here.

You can purchase Lovely You as a bundle with the Lovely Labels Pick A Punch and save 10%. However, since we are using minimal supplies, this Monday Card only uses the stamp set. But more on the punch later!

Lovely You Stamp Set
Lovely You Stamp Set, item #152525

That’s right, one stamp set, Lovely You, two ink pads, Rich Razzleberry and Shaded Spruce, and two colors of cardstock, Rich Razzleberry and Whisper White. Please follow along!

A Monday Card

The Card Recipe

Rich Razzleberry CS: 5-1/2 x 8-1/2″, score at 4-1/4″ for card base.

Rich Razzleberry CS: 4 x 5-1/4″, 1-3/4 x 3-1/2″, ″ and 1 x 4″, small scrap

Whisper White CS: 4 x 5 1/4″ (for inside, optional)

Whisper White CS: 1-1/2 x 3-1/4″, 3/4 x 3-3/4″, (4 of) 3/4 x 5″, small scrap

Stamp And Assemble

This Monday’s Are Hard, Stamping Shouldn’t Be Card starts out with the typical “fold in half” and score with your bone folder to get a great crisp card base. Let’s not break tradition.

However, my TIP to you is to score once, invert the fold and score again. Your inner crease is now as crisp as the outer one. This makes for a professional looking card base!

Rich Razzleberry cardstock and bone folder

Create Your Own Designer Series Paper

With the minimal supplies used in this card, we are not adding designer series paper to it. We are making our own!

This great background pattern can be used with any stamp sets you own that contain small stamps and sentiments. It is a great way to use up some of those white strips of left-over paper that are lying around too!

I started with the Shaded Spruce Ink and 2 of the 3/4 x 5″ Whisper White strips. I used the three-leaf stamp from the Lovely You Stamp Set four times on one strip. Next, I used the sentiment “always”, and varied which letters from the word showed on my narrow paper strip.

Shaded Spruce Ink and stamps from Lovely You Stamp Set

After completing the Shaded Spruce strips, I worked on the Rich Razzleberry ones. On the two remaining strips, I stamped flowers from the Lovely You Stamp Set. I was able to get four of the larger flower images on one, and five of the smaller images on the other.

Rich Razzleberry Ink and stamps from Lovely You Stamp Set

After I stamped all four strips, I adhered them to a piece of 4 x 5-1/4″ Rich Razzleberry CS. I like to “dry fit” my pieces before permanently attaching them. This gives me time to see if I like the layout, and the ability to change my mind.

Layering stamped strips for card front

I kept my strips closer to the left, with a portion of the Rich Razzleberry visible on the right. There is room to play here, and you could easily separate the strips farther apart and fill the space instead.

Focal Stamping

This card has a lot of small stamps doing all the work. To anchor the sentiment, I continued by using Shaded Spruce Ink and the leaf sprig stamp from the Lovely You Stamp Set. But this time, I doubled the size by stamping the image twice, once up and once down.

Sprig leaf stamp from Lovely You Stamp Set

If there is an overlap in the middle, that is fine. The middle stamping will be covered up by the sentiment layer later on. I adhered this 1-1/2 x 3-1/4″ Whisper White CS to a panel of Rich Razzleberry CS, 1-3/4 x 3-1/2″.

So Many Sentiments

The Lovely You Stamp Set has 8 sentiments, along with 3 individual words. This stamp set has so much variety! I chose the sentiment “miles apart, but still in my heart”.

Sentiment stamp from Lovely You Stamp Set

When I stamped the sentiment in Rich Razzleberry Ink, I kept the image to the right of my 3/4 x 3-3/4″ Whisper White CS. Next, I adhered it to a layer of 1 x 4″ Rich Razzleberry CS.

Finishing Touches

The leaf sprig layer and sentiment layer need to be placed on the card. I placed the leaf sprig layer toward the left of the card, overlapping some of the smaller strips. The final position can be chosen to suit the background stamps in play.

When it came time to add the sentiment strip over the sprig assembly, the previous card layering left one end much lower. I solved this off-kilter situation by adding small pieces of Rich Razzleberry CS to the back of the sentiment layer where it needed a ‘bump’ up.

Adding cardstock bumps to create the proper height
The back of this sentiment piece needed to go up at least two levels,which I accomplished by adding small pieces of like-color cardstock in the appropriate area.

Fussy Details

Fussy cutting is not a favorite of most people. I try to keep mine to a minimum as well. But from time to time, it adds a needed detail to a card.

For this Monday card, I stamped the three-leaf stamp in Shaded Spruce, and the larger of the floral stamps in Rich Razzleberry onto a white scrap. Then, I did a little of the dreaded fussy cutting with my Paper Snips.

Fussy cut images from Lovely You Stamp Set

The middle of the fussy cut leaf will be covered by the flower, so it will not require the fussiest of cutting. The flower is easy to fussy cut, as just the head is needed. Lastly, I attached them to my card front, on the left of the sentiment piece.

Adding fussy cut pieces to card front

The Insider Job

Your card is beautiful on the outside, now lets make it pretty inside too! I like to mimic some of the outer stamping into a corner of the inside card. This way the card has continuity and there is still lots of room to add your own sentiment or written thoughts.

Here, I used the leaf sprig stamp and Shaded Spruce Ink first. I angled the image from the bottom corner toward the middle of the 4 x 5-1/4″ Whisper White CS. Next, I stamped the larger flower in Rich Razzleberry and added it on the side.

Inside stamping using Lovely You Stamp Set

Step It Up!

For my stepped up version of this same card, I pulled out the Lovely Labels Pick A Punch, which can be purchased at the same time as the stamp set for an instant 10% savings, using item #154070 when buying both.

Lovely Labels Pick A Punch, item #152883

Because this versatile punch removes a small amount of cardstock from the end, you will need to add 1/8″ to your cardstock measurement for each side that is punched. So, in my next card sample, I added 1/8″ to the four background strips, punching only one end. For the sentiment pieces, I added 1/4″, because I punched both ends.

Stepped up Lovely You Card
This stepped up card shows the work of the Lovely Labels Pick A Punch. I was able to use two different label ends (see layering strips and sentiment) with one punch.
  • Handy Tip: When cutting cardstock for the Lovely Labels Pick A Punch, you can choose 1/2″, 3/4″ or 1″ strips to fit in the channels. I find that the cardstock fits smoothly if I shave 1/16″ off the width from the stated sizes when cutting my paper.

In my stepped up Lovely You card, I also used the Tasteful Textile 3D Embossing Folder (item #152718) on the 4 x 5-1/4″ Rich Razzleberry CS to help define it. I used some retired Rich Razzleberry Ribbon and a gem from the Rhinestone Basic Jewels (item #144220) in the center of my flower.

Another Monday

I hope you enjoyed making this easy card on a hard Monday with me. My video tutorial can be found on my FaceBook page, as well as my YouTube channel. If you need any supplies for this card, please feel free to visit my online store, https://www.juliemakson.stampinup.net, at any time. See you next Monday for another installment of:

Monday’s Are Hard, Stamping Shouldn’t Be!